Via EPIA-EK10000G User Manual - Page 60
PS2KB Wakeup Select, PS2MS Wakeup from S3/S4/S5, PS2KB Wakeup from S3/S4/S5, USB Resume, PowerOn
UPC - 825529003581
View all Via EPIA-EK10000G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Chapter 3 PS2KB Wakeup Select When selecting "Password", press or to change password. The maximum number of characters is eight. "PS2MS Wakeup from S3/S4/S5" and "PS2KB Wakeup from S3/S4/S5" will be disabled while changing the password. Settings: [Hot Key, Password] PS2MS Wakeup from S3/S4/S5 Enables any mouse activity to restore the system from the power saving mode to an active state. Settings: [Disabled, Enabled] PS2KB Wakeup from S3/S4/S5 Sets a Hot Key to restore the system from the power saving mode to an active state. Settings: [Disabled, Ctrl+F1, Ctrl+F2, Ctrl+F3, Ctrl+F4, Ctrl+F5, Ctrl+F6, Ctrl+F7, Ctrl+F8, Ctrl+F9, Ctrl+F10, Ctrl+F11, Ctrl+F12, Power, Wake, Any Key] USB Resume Enables activity detected from USB devices to restore the system from a suspended state to an active state. Settings: [Disabled, Enabled] PowerOn by PCI Card Enables activity detected from any PCI card to power up the system or resume from a suspended state. Such PCI cards include LAN card, onboard LAN controller, onboard USB ports, etc. Settings: [Disabled, Enabled] Modem Ring Resume Enables any Wake-on LAN or Ring-In signals from the Ethernet or modem to restore the system from a suspended state to an active state. Settings: [Disabled, Enabled] 52