Via EPIA-MII12000G User Manual - Page 28

Case Connector, F_PANEL, Power Switch PW_BN, Reset Switch RESET, Power LED PWR LED, HDD LED,

Get Via EPIA-MII12000G - VIA EPIA MII 12000G Motherboard PDF manuals and user guides View all Via EPIA-MII12000G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

Chapter 2 Case Connector: F_PANEL The F_PANEL connector block allows you to connect to the power switch, reset switch, power LED, HDD LED, SLED and the Speaker on the case. 2 16 Pin Signal Pin Signal 1 PWR LED+ 2 HDD LED+ 3 PWR LED+ 4 HDD LED- 1 5 PWR LED- 6 PW_BN+ 7 SPEAKER+ 8 PW_BN- 9 NC 10 RESET+ 11 NC 12 RESET- 13 SPEAKER- 14 SLP_LED+ 15 NC 16 SLP_LED- 15 CLE266 Power Switch (PW_BN) Connect to a 2-pin push button switch. system power on or off. Pressing this button will turn the Reset Switch (RESET) The Reset Switch is used to reboot the system rather than turning the power ON/OFF. Avoid rebooting while the HDD is working. You can connect the Reset Switch from the system case to this pin. Power LED (PWR LED) The LED is lit when the system is power on. If the system is in S1 (POS Power On Suspend) or S3 (STR - Suspend To RAM) state, the LED will blink. HDD LED HDD LED shows the activity of a hard disk drive. Avoid turning the power off while HDD LED is lit. Connect the HDD LED from the system case to this pin. SLP_SLED The SLP_LED is lit when the system is in the S1 (POS-Power On Suspend) state. 20

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
Chapter 2
20
Case Connector:
F_PANEL
The F_PANEL connector block allows you to connect to the power switch,
reset switch, power LED, HDD LED, SLED and the Speaker on the case.
Pin
Signal
Pin
Signal
1
PWR LED+
2
HDD LED+
3
PWR LED+
4
HDD LED-
5
PWR LED-
6
PW_BN+
7
SPEAKER+
8
PW_BN-
9
NC
10
RESET+
11
NC
12
RESET-
13
SPEAKER-
14
SLP_LED+
15
NC
16
SLP_LED-
Power Switch (PW_BN)
Connect to a 2-pin push button switch.
Pressing this button will turn the
system power on or off.
Reset Switch (RESET)
The Reset Switch is used to reboot the system rather than turning the power
ON/OFF. Avoid rebooting while the HDD is working. You can connect the
Reset Switch from the system case to this pin.
Power LED (PWR LED)
The LED is lit when the system is power on. If the system is in S1 (POS -
Power On Suspend) or S3 (STR - Suspend To RAM) state, the LED will blink.
HDD LED
HDD LED shows the activity of a hard disk drive. Avoid turning the power off
while HDD LED is lit. Connect the HDD LED from the system case to this pin.
SLP_SLED
The SLP_LED is lit when the system is in the S1 (POS-Power On Suspend) state.
CLE266
1
15
16
2