Via EPIA-MII12000G User Manual - Page 49

Onboard IDE Channel 1/2, IDE Prefetch Mode, Display Card Priority, Frame Buffer Size

Get Via EPIA-MII12000G - VIA EPIA MII 12000G Motherboard PDF manuals and user guides View all Via EPIA-MII12000G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

INTEGRATED PERIPHERALS BIOS Setup Onboard IDE Channel 1/2 The integrated peripheral controller contains an IDE interface with support for two IDE channels. Choose Enabled to activate each channel separately. Settings: Enabled and Disabled IDE Prefetch Mode This allows your hard disk controller to use the fast block mode to transfer data to and from the hard disk drive. Block mode is also called block transfer, multiple commands or multiple sector read/write. Enabled enables IDE controller to use block mode; Disabled allows the controller to use standard mode. Settings: Enabled and Disabled Display Card Priority This setting specifies which VGA card is your primary graphics adapter. Settings: PCI Slot and AGP Frame Buffer Size This setting instructs the BIOS to reserved the specified amount of memory for the internal video controller. Settings: 16M, 32M, 64M 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
BIOS Setup
41
I
NTEGRATED
P
ERIPHERALS
Onboard IDE Channel 1/2
The integrated peripheral controller contains an IDE interface with support for
two IDE channels. Choose
Enabled
to activate each channel separately.
Settings:
Enabled
and
Disabled
IDE Prefetch Mode
This allows your hard disk controller to use the fast block mode to transfer
data to and from the hard disk drive. Block mode is also called block transfer,
multiple commands or multiple sector read/write.
Enabled
enables IDE
controller to use block mode;
Disabled
allows the controller to use standard
mode. Settings:
Enabled
and
Disabled
Display Card Priority
This setting specifies which VGA card is your primary graphics adapter.
Settings:
PCI Slot
and
AGP
Frame Buffer Size
This setting instructs the BIOS to reserved the specified amount of memory
for the internal video controller. Settings:
16M, 32M, 64M