Via EPIA-MII12000G User Manual - Page 46
Typematic Rate Setting, Typematic Rate Chars/Sec, Typematic Delay Msec, Security Option, Display
View all Via EPIA-MII12000G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Chapter 3 Typematic Rate Setting When Disabled, the following two items (Typematic Rate and Typematic Delay) are irrelevant. Keystrokes repeat at a rate determined by the keyboard controller in your system. When Enabled, you can select a typematic rate and typematic delay. Settings: Enabled and Disabled Typematic Rate (Chars/Sec) When Typematic Rate Setting is enabled, this item allows you to set the rate (characters/second) at which the keys are accelerated. Settings: 6, 8, 10, 12, 15, 20, 24 and 30 Typematic Delay (Msec) When Typematic Rate Setting is enabled, this item allows you to select the delay between when the key was first pressed and when the acceleration begins. Settings: 250, 500, 750 and 1000 Security Option If you have set a password, select whether the password is required every time the System boots, or only when you enter Setup. Settings are described below: Setup The password prompt appears only when end users try to run Setup. System A password prompt appears every time when the computer is powered on or when end users try to run Setup. Display Full Screen Logo Show full screen logo during BIOS bootup process. Settings: Enabled and Disabled Show Summary Information Show the summary information during the BIOS boot process. Settings: Enabled and Disabled Display Small Logo Show small energy star logo during BIOS boot up process. Settings: Enabled and Disabled 38