Via EPIA-MII12000G User Manual - Page 35
Clear CMOS, CLEAR_CMOS, RCA Video or S/PDIF Select: SPDIF_SEL
View all Via EPIA-MII12000G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Installation JUMPERS The mainboard provides jumpers for setting some mainboard's functions. This section will explain how to change the settings of the mainboard's functions through the use of the jumpers. Clear CMOS: CLEAR_CMOS The onboard CMOS RAM stores system configuration data and has an onboard battery power supply. The long-life battery has a lifetime of at least 5 years. If you want to clear the system configuration data from the CMOS RAM, use the CLEAR_CMOS (Clear CMOS jumper). You can clear the CMOS by shorting pins 1 and 2 while the system is off. Then return it to the 2-3 pin position. Shorting the jumper while the system is on will damage the mainboard. The default position of the jumper is on pins 2 and 3. Setting 1 2 3 Keep OFF ON ON Clear ON ON OFF 1 2 3 4 SPDIF_SEL 3 2 1 CLE266 CLEAR_CMOS RCA Video or S/PDIF Select: SPDIF_SEL Users can select either RCA Video or S/PDIF as the enabled function on the dual-purpose port. Please note that text may not be clear due to the lower resolution in TV sets. If the text is not legible, try enlarging the text in the OS control panels. If your TV screen flickers, set the refresh rate to 60 Hz or less. Setting RCA SPDIF 1 2 ON ON OFF OFF 3 4 OFF OFF ON ON 27