ViewSonic CDE6520-W User Guide - Page 51

Optional function Get Function Length ID Command Command Response Range Comments Type (ASCII) Code Code (Three ASCII Get-Contrast 8 (ASCII) (Hex) bytes) g a 61 000 ~ 100 Get-Sharp- 8 g c 63 000 ~ 100 ness Get-Color 8 Get-Tint 8 Get-Backlight 8 g d 64 000 ~ 100 g e 65 000 ~ 100 g h 68 000: Off On_Off*3.2.3 Get-Date: 8 001: On g 2 32 Y00~Y00 Last 2 digits Year Get-Date: 8 (20)17~(20)99 g 2 32 M00~M00 2 digits Month Get-Date: 8 g 2 32 D00~M00 2 digits Day Get-Time: 8 g 3 33 H00~H00 24-hr format. 2 digits Hour Get-Time: 8 g 3 33 M00~M00 2 digits Min Get-Time: 8 g 3 33 S00~S00 2 digits Sec 11.3.3. Remote Control Pass-through mode When the PC sets the TV/DS to Remote Control Pass through mode, the TV/DS will send a 7-byte packet (followed by "CR") in response to RCU button activation. Note, that in this mode the RCU shall have no effect on the TV/DS function. For example: "Volume+" will not change the volume in the LCD but only sends "Volume+" code to PC over the RS232 port. IR Pass Through-Function format Reply: (Command Type="p") Name Length ID Byte Count Bytes order 1 Byte 1 2 Byte 2~3 Command Type 1 Byte 4 RCU Code1 (MSB) 1 Byte 5 RCU Code2 (LSB) 1 Byte 6 CR 1 Byte 7 Example1: Remote Control pass-through when "VOL+" key is pressed for TV-05 Send (Hex Format) Name Length ID Command Type Command Value1 CR Hex 0x36 0x30 0x35 0x70 0x31 0x30 0x0D 43