ViewSonic LS800WU LS800HD User Guide English
ViewSonic LS800WU Manual
 |
View all ViewSonic LS800WU manuals
Add to My Manuals
Save this manual to your list of manuals |
ViewSonic LS800WU manual content summary:
- ViewSonic LS800WU | LS800HD User Guide English - Page 1
LS800WU/LS800HD DLP Projector User Guide IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited - ViewSonic LS800WU | LS800HD User Guide English - Page 2
, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there - ViewSonic LS800WU | LS800HD User Guide English - Page 3
unit near water. 6. Clean with a soft, dry cloth. 7. Do not block any ventilation openings. Install the unit in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, RURWKHUGHYLFHV LQFOXGLQJDPSOL¿HUV WKDWSURGXFHKHDW - ViewSonic LS800WU | LS800HD User Guide English - Page 4
Declaration of RoHS2 Compliance This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to - ViewSonic LS800WU | LS800HD User Guide English - Page 5
future customer service needs. Please print this user guide and fill the information in the "For Your Records" section. For additional information, please see the "Customer Support" section in this guide. For Your Records Product Name: Model Number: LS800WU/LS800HD ViewSonic DLP Projector VS17078 - ViewSonic LS800WU | LS800HD User Guide English - Page 6
Alerts 50 RS232 by Telnet Function 52 Shutting down the projector 56 Menu operation 57 Maintenance 67 Care of the projector 67 Light Source Hours information........ 68 Troubleshooting 71 Specifications 72 Projector specifications 72 Dimensions 73 Ceiling mount installation 73 Timing - ViewSonic LS800WU | LS800HD User Guide English - Page 7
the product. Safety Instructions 1. Please read this manual before you operate your projector. Save it for future reference. 2. Do not look straight at the projector lens during operation. The intense light beam may damage your eyes. 3. Refer servicing to qualified service personnel. 4. Always open - ViewSonic LS800WU | LS800HD User Guide English - Page 8
transporting or installation. It should be used with a commercially available theft prevention cable. Safety instructions for ceiling mounting of the projector We want you to have a pleasant experience using your projector, so we need to bring this safety matter to your attention to prevent damage - ViewSonic LS800WU | LS800HD User Guide English - Page 9
scattered light can be hazardous to eyes and skin. There is a potential hazard of eye exposure to laser radiation if the included instructions are not followed. Caution - use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation - ViewSonic LS800WU | LS800HD User Guide English - Page 10
Product labels Below drawing show the label's location. 1 12 Complies with FDA performance standards for laser products except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 LASER RADIATION AVOID DIRECT EYE EXPOSURE CLASS 3R LASER PRODUCT Emitted wavelength : 450-460 nm Max. - ViewSonic LS800WU | LS800HD User Guide English - Page 11
Location of laser aperture Below drawing is the laser aperture location. Be careful not to let the eye see the light directly. /DVHUDSHUWXUH Interlock switches This machine has 1 (Top cover) Interlock switches to protect the laser light Leakage. Will power-off the system individually when the top - ViewSonic LS800WU | LS800HD User Guide English - Page 12
design to deliver high reliability and ease of use. The projector offers the following features. • Power saving function decreasing the time • Presentation timer for better control of time during presentations • Supports 3D display • Color Management allowing color adjustments to your liking • Less - ViewSonic LS800WU | LS800HD User Guide English - Page 13
. Projector Home Projector Quick Start Guide http://vsweb.us UG Link http://vsweb.us/ ViewSonic Corporation (US/Canada/Latin America) : www.viewsonic.com/support/product-registration : 14035 Pipeline Ave. Chino, CA 91710, USA : 909-468-1240 United States 1-800-688-6688 [email protected] - ViewSonic LS800WU | LS800HD User Guide English - Page 14
IR remote sensor 2. Projection lens 3. Focus ring 4. Zoom ring 5. LENS SHIFT UP/DOWN 6. LENS SHIFT RIGHT/LEFT 7. Vent (air inlet) 8. External control panel (See "Projector" on page 10 for details.) 9. Power button and top IR remote sensor 10. AC power cord inlet 11. HDMI 1 port 12. HDMI 2 port 13 - ViewSonic LS800WU | LS800HD User Guide English - Page 15
Controls and functions Projector 12 3 4 25 26 27 28 29 120 121 122 13 14 15 16 1. of the projected image. (Keystone key) 3. Zoom ring Adjusts the size of the projected image. Manually corrects distorted images resulting from an angled projection. 4. LENS SHIFT RIGHT/LEFT 10. (Menu down) - ViewSonic LS800WU | LS800HD User Guide English - Page 16
up or flashes when the projector is becomes too high. under operation. 14. Light source indicator light 16. Power Indicates the status of the light source. Toggles the projector between standby Lights up or flashes when the light source mode and Power ON. has developed a problem. 11 - ViewSonic LS800WU | LS800HD User Guide English - Page 17
11 25 12 26 13 14 15 27 28 16 29 17 30 18 1. Power 7. / / / (Keystone keys) Toggles the projector between standby mode and Power ON. Manually corrects distorted images resulting from an angled projection. 2. HDMI 1 Left/ Right/ Up/ Down Selects HDMI 1 source for display. Selects - ViewSonic LS800WU | LS800HD User Guide English - Page 18
Timer)/7 28. (Mute)/8 Brings up the Presentation Timer settings Toggles the projector audio between on menu. and off. 17. Eco Mode/ID Set Pattern/0 display. Displays embedded test pattern. 30. Color Mode 19. Power Off Selects an available picture setup mode. Turns the projector off. 13 - ViewSonic LS800WU | LS800HD User Guide English - Page 19
menu. To switch the code for the remote control, press ID set and the number button corresponding to the remote control code set in the projector OSD together for 5 seconds or more. The initial code is set to 1. When the code is switched to 8, the remote control can control every - ViewSonic LS800WU | LS800HD User Guide English - Page 20
• Replace only with the same or equivalent type recommended by the battery manufacturer. • Dispose of the used batteries according to the manufacturer's instructions and local environment regulations for your region. • Never throw the batteries into a fire. There may be danger of an explosion. • If - ViewSonic LS800WU | LS800HD User Guide English - Page 21
position of your screen, the location of a suitable power outlet, as well as the location and distance between the projector and the rest of your equipment. Your projector is designed to be installed in one of the following 4 possible installation locations: 1. Front Table Select this location with - ViewSonic LS800WU | LS800HD User Guide English - Page 22
Projection dimensions LS800HD (1080P) The "screen" mentioned below refers to the projection screen usually consisting of a screen surface and a support structure. • 16:9 image on a 16:9 screen • 16:9 image on a 4:3 screen (e): Screen (f): Center of lens (a) Screen Size inch mm 50 1270 60 1524 70 - ViewSonic LS800WU | LS800HD User Guide English - Page 23
(a) Screen Size inch mm 54 1372 65 1651 76 1930 87 2210 98 2489 109 2769 120 3048 131 3327 142 3607 153 3886 163 4140 185 4699 207 5258 16:9 image on a 4:3 Screen (b) Projection distance min. max. (c) Image height (d) Vertical offset min. max. inch mm inch mm inch mm inch mm inch mm 50 - ViewSonic LS800WU | LS800HD User Guide English - Page 24
LS800WU (WUXGA) The "screen" mentioned below refers to the projection screen usually consisting of a screen surface and a support structure. • 16:10 image on a 16:10 screen (b) (a) (d) (c) (e) • 16:10 image on a 4:3 screen (b) (a) (d) (c) (f) (e): Screen (f): Center of lens (a) Screen Size inch - ViewSonic LS800WU | LS800HD User Guide English - Page 25
among these numbers due to optical component variations. It is recommended that if you intend to permanently install the projector, you should physically test the projection size and distance using the actual projector in situ before you permanently install it, so as to make allowance for this - ViewSonic LS800WU | LS800HD User Guide English - Page 26
for each source. 3. Ensure the cables are firmly inserted. In the connections shown below, some cables may not be included with the projector (see "Shipping contents" on page 8). They are commercially available from electronics stores. The connection illustrations below are for reference only. The - ViewSonic LS800WU | LS800HD User Guide English - Page 27
as well as on the screen, you can connect the MONITOR OUT signal output socket on the projector to an external monitor with a VGA cable following the instructions below: 1. Connect the projector to a computer as described in "Connecting a computer" on page 22. 2. Take a suitable VGA cable (only one - ViewSonic LS800WU | LS800HD User Guide English - Page 28
device. Least video quality Composite Video is an analog video and will result in a perfectly acceptable, but less than optimal result from your projector, being the least video quality of the available methods described here. See "Connecting a composite Video source device" on page 25 for how to - ViewSonic LS800WU | LS800HD User Guide English - Page 29
end of the VGA (D-Sub)-Component adaptor cable (with a D-Sub type connector) to the COMPUTER IN socket on the projector. If the selected video image is not displayed after the projector is turned on and the correct video source has been selected, check that the Video source device is turned on and - ViewSonic LS800WU | LS800HD User Guide English - Page 30
cable connection. • You might get feedback noise from the microphone when you are too close to the speaker of the projector. Move the microphone away from the speaker of the projector. The greater volume you require, the greater distance you need to be away from the Speaker to prevent the noise. 25 - ViewSonic LS800WU | LS800HD User Guide English - Page 31
the Power On/Off Ring Tone" on page 45 for details. 4. If the projector is activated for the first time, select your OSD language following the on-screen instructions. 5. Switch all of the connected equipment on. 6. The projector will start to search for input signals. The current input signal being - ViewSonic LS800WU | LS800HD User Guide English - Page 32
Using the menus The projector is equipped with On-Screen Display (OSD) menus for menu icon Highlight Status Sub-menu Current input signal Go to the previous page or to exit. When projector is first time turned on after out of box, language selection will pop out automatically. 1. Press Menu - ViewSonic LS800WU | LS800HD User Guide English - Page 33
be asked to enter the six-digit password every time you turn on the projector. If you enter the wrong password, the password error message as pictured to -digit password, or if you did not record the password in this user manual, and you absolutely do not remember it, you can use the password recall - ViewSonic LS800WU | LS800HD User Guide English - Page 34
Auto Sync on the remote or Auto on the key pad for 8 times. The projector will display a coded number on the screen. 2. Write down the number and turn off your projector. 3. Seek help from the local service center to decode the number. You may be required to provide proof of purchase documentation - ViewSonic LS800WU | LS800HD User Guide English - Page 35
screen at a time. Be sure the Quick Auto Search function in the SYSTEM menu is On if you want the projector to automatically search for the signals. You can also manually select the desired signal by pressing one of the source selection keys on the remote control, or cycle through the available - ViewSonic LS800WU | LS800HD User Guide English - Page 36
the adjuster foot to fine tune the angle until the image is positioned where you want it. If the projector is not placed on a flat surface or the screen and the projector are not perpendicular to each other, the projected image becomes trapezoidal. To correct this situation, see "Correcting keystone - ViewSonic LS800WU | LS800HD User Guide English - Page 37
Adjusting the horizontal image position With the lens horizontal image position can be adjusted to a maximum of 5% for 1080P and 5% for WUXGA of the image width. Note that the maximum horizontal image height adjustment can be limited by the vertical image position. For example it is not possible to - ViewSonic LS800WU | LS800HD User Guide English - Page 38
Adjusting projected image position using lens shift Vertical Horizontal Lens Shift Knob Lens Shift Knob The Lens Shift feature provides a lens shift function that can be used to adjust the position of the projected image either horizontally or vertically within the range detailed below. Shift - ViewSonic LS800WU | LS800HD User Guide English - Page 39
where the projected image becomes a trapezoid due to angled projection. To correct this, besides adjusting the height of the projector, you will need to manually correct it following one of these steps. • Using the remote control 1. Press / / / to display the Keystone correction page. 2. Press - ViewSonic LS800WU | LS800HD User Guide English - Page 40
Adjusting 4 corners Using the OSD menu Open the OSD menu and go to the DISPLAY > Corner Adj. menu. 1. It will show 4 corner adjustmant OSD on screen. 2. To select the corner you want to adjust than the selected area will show gray color 3. Two degree selection couble be adjust 4. To save the - ViewSonic LS800WU | LS800HD User Guide English - Page 41
in 4:3 ratio, and digital TV and DVDs are usually in 16:9 ratio. With the advent of digital signal processing, digital display devices like this projector can dynamically stretch and scale the image output to a different aspect than that of the image input signal. To change the projected image ratio - ViewSonic LS800WU | LS800HD User Guide English - Page 42
in the center of the screen with a 2.35:1 aspect ratio without aspect alteration. 2.35:1 picture Optimizing the image Selecting a picture mode The projector is preset with several predefined picture modes so that you can choose one to suit your operating environment and input signal picture type - ViewSonic LS800WU | LS800HD User Guide English - Page 43
Using Screen Color In the situation where you are projecting onto a colored surface such as a painted wall which may not be white, the Screen Color feature can help correct the projected picture's colors to prevent possible color difference between the source and projected pictures. To use this - ViewSonic LS800WU | LS800HD User Guide English - Page 44
the projected picture. It enables a greater than 50% brightness increase in mid-tone images, which are common in video and natural scenes, so the projector reproduces images in realistic and true colors. If you prefer images with that quality, select a level that suits your need. If you don't need - ViewSonic LS800WU | LS800HD User Guide English - Page 45
to allow for more accurate color reproduction, should you require it. If you have purchased a test disc which contains various color test patterns and can be used to test the color presentation on monitors, TVs, projectors, etc., you can project any image from the disc on the screen and enter the - ViewSonic LS800WU | LS800HD User Guide English - Page 46
Setting the presentation timer Presentation timer can indicate the presentation time on the screen to help you achieve better time management when giving presentations. Follow these steps to utilize this function: 1. Go to the BASIC > Presentation Timer menu. 2. Press Enter to display the - ViewSonic LS800WU | LS800HD User Guide English - Page 47
is between 5°C-25°C. CAUTION Do not use the High Altitude Mode if your altitude is between 0 m and 1500 m and temperature is between 5°C and 35°C. The projector will be over cooled, if you turn the mode on under such a condition. To activate the High Altitude Mode: 1. Open the OSD menu and go - ViewSonic LS800WU | LS800HD User Guide English - Page 48
a device that also supports CEC function is connected to the HDMI input of the projector, when the projector's power is turned off format automatically. In other cases, you may need to manually select a 3D Sync format for the projector to project 3D images correctly. To select a 3D Sync problem. 43 - ViewSonic LS800WU | LS800HD User Guide English - Page 49
to the BASIC > Audio Settings > Mute menu. 2. Press / to select On. If available, you can press and off. on the remote control to toggle the projector audio between on Adjusting the sound level 1. Open the OSD menu and go to the BASIC > Audio Settings > Audio Volume menu. 2. Press / to select - ViewSonic LS800WU | LS800HD User Guide English - Page 50
applied for trademark and logo registration in Japan, the United States of America, and other countries by JBMIA. Supported External Devices This projector is supported by the specified commands of the Crestron Electronics controller and related software (ex, RoomView®). http://www.crestron.com - ViewSonic LS800WU | LS800HD User Guide English - Page 51
of external devices which can be connected to the LAN/RJ45 port and remote/control the projector, as well as the related control commands supporting for each external device, kindly please get contact with the Support-Service team directly. LAN_RJ45 1. Connect an RJ45 cable to RJ45 ports on the - ViewSonic LS800WU | LS800HD User Guide English - Page 52
3. Right-click on Local Area Connection, and select Properties. 4. In the Properties window, select the Networking tab, and select Internet Protocol (TCP/IP). 5. Click Properties. 6. Click Use the following IP address and fill in the IP address and Subnet mask, then click OK. 47 - ViewSonic LS800WU | LS800HD User Guide English - Page 53
7. Press the MENU button on the projector. 8. Select Advanced > Network Setting > Wired LAN. 9. After getting into Wired LAN, input the following: • bar, input the IP address: 10.10.10.10. 12. Press ENTER / . The projector is setup for remote management. The LAN/RJ45 function displays as follows. 48 - ViewSonic LS800WU | LS800HD User Guide English - Page 54
Network Configuration User Password Admin Password Item IP Address IP ID Port Projector Name Location Assigned To DHCP (Enabled) IP Address Subnet Mask Default Gateway DNS Server Enabled New Password Confirm Enabled New Password Confirm more information, please - ViewSonic LS800WU | LS800HD User Guide English - Page 55
Preparing Email Alerts 1. Make sure that user can access the homepage of LAN RJ45 function by web browser (for ex-ample, Microsoft Internet Explorer v6.01/v8.0). 2. From the Homepage of LAN/RJ45, click Alert Settings. 3. By default, these input boxes in Alert Settings are blank. 50 - ViewSonic LS800WU | LS800HD User Guide English - Page 56
field is the sender's email address (for example, the projector administrator). This is a required field. Select the alert conditions by checking the desired boxes. Fill in all fields as specified. User can click Send Test Mail to test what setting is correct. For successful sending an e-mail alert - ViewSonic LS800WU | LS800HD User Guide English - Page 57
way, so called "RS232 by TELNET" for LAN/RJ45 interface. Quick Start-Guide for "RS232 by TELNET" 1. Check and get the IP-Address on OSD of the projector. 2. Make sure that laptop/PC can access the web-page of the projector. 3. Make sure that "Windows Firewall" setting to be disabled in case of - ViewSonic LS800WU | LS800HD User Guide English - Page 58
(ttt.xxx.yyy.zzz: IP-Address of the projector) If Telnet-Connection ready, and user can have RS232 command input, then Enter key pressed, the RS232 command will be workable. 53 - ViewSonic LS800WU | LS800HD User Guide English - Page 59
How to have TELNET enabled in Windows VISTA / 7 / 8 / 10 By default installation for Windows VISTA / 7 / 8 / 10, "TELNET" function is not included. But end-user can have it by way of "Turn Windows features On or Off" to be enabled. 1. Open Control Panel in Windows VISTA / 7 / 8 / 10. 2. Open - ViewSonic LS800WU | LS800HD User Guide English - Page 60
OK button. Specsheet for "RS232 by TELNET" : 1. Telnet: TCP. 2. Telnet port: 4661. (for more detail, kindly please get contact with the service agent or team) 3. Telnet utility: Windows "TELNET.exe" (console mode). 4. Disconnection for RS232-by-Telnet control normally: Close Windows Telnet utility - ViewSonic LS800WU | LS800HD User Guide English - Page 61
Power a second time. 3. Once the cooling process finishes, a "Power Off Ring Tone" will be heard. Disconnect the power cord from the wall socket if the projector will not be used in an extended period of time. To turn off the ring tone, see "Turning off the Power On/Off Ring Tone - ViewSonic LS800WU | LS800HD User Guide English - Page 62
(OSD) menus vary according to the signal type selected. The menu items are available when the projector detects at least one valid signal. If there is no equipment connected to the projector or no signal detected, limited menu items are accessible. Main menu Sub-menu Options 1. DISPLAY 2. IMAGE - ViewSonic LS800WU | LS800HD User Guide English - Page 63
/No Blank Timer Disable/5 min/10 min/15 min/20 min/25 min/30 min Message On/Off Pattern On/Off Splash Screen Black/Blue/ViewSonic/Off 58 - ViewSonic LS800WU | LS800HD User Guide English - Page 64
Main menu Sub-menu Options 3D Settings HDMI Settings Network Settings 5. ADVANCE D RS232 Settings Remote Sensor 3D Sync 3D Sync Invert HDMI Format HDMI Range Wired LAN AMX Device Discovery Control 4 HDBaseT Baud Rate Channel Auto/Off/Frame Sequential/Frame Packing/Top-Bottom/Side-by-Side - ViewSonic LS800WU | LS800HD User Guide English - Page 65
Main menu Sub-menu Options 6. SYSTEM Language Multi-language OSD selection Projector Front Table/Rear Table/ Position Rear Ceiling/Front Ceiling Menu Display 5 sec/10 sec/15 sec/20 sec/ Menu Time 25 sec/30 sec Settings - ViewSonic LS800WU | LS800HD User Guide English - Page 66
1. DISPLAY menu Description of each menu Function Screen Color Aspect Ratio Description See "Using Screen Color" on page 38 for details. This function is only available when a PC input signal is selected. See "Selecting the aspect ratio" on page 36 for details. Keystone Corner Adj. Position - ViewSonic LS800WU | LS800HD User Guide English - Page 67
2. IMAGE menu Function Color Mode Brightness Contrast Color Temp ADVANCED Reset Color Settings Description See "Selecting a picture mode" on page 37 for details. See "Adjusting Brightness" on page 38 for details. See "Adjusting Contrast" on page 38 for details. See "Selecting a Color Temperature" - ViewSonic LS800WU | LS800HD User Guide English - Page 68
"Hiding the image" on page 42 for details. Selecting On displays the current information on the screen when the projector is detecting or searching for a signal. The projector can display grid test patterns. It helps you adjust the image size and focus and check that the projected image is free from - ViewSonic LS800WU | LS800HD User Guide English - Page 69
be detected by AMX controller. Control4 If you network environment uses a Control4 or Control4 SDDP controller, turn on the Control4 setting to allow the projector to be detected. HDBaseT See "Connecting a HDBaseT device" on page 23 for the details. Baud Rate Select RS232 Baud Rate. Channel RS232 - ViewSonic LS800WU | LS800HD User Guide English - Page 70
when light source mode is under Custom. Reset Light Source Hours Service center shall reset light source hour after change light source parts. The following settings will still remain: Keystone, OverScan, Language, Projector Position, High Altitude Mode, Security Settings, Remote Control Code, Corner - ViewSonic LS800WU | LS800HD User Guide English - Page 71
6. SYSTEM menu Function Language Projector Position Menu Settings Description Sets the language for the On-Screen Display (OSD) menus. See "Using the menus" on page 27 for details. See "Choosing a - ViewSonic LS800WU | LS800HD User Guide English - Page 72
wax, alcohol, benzene, thinner or other chemical detergents. These can damage the case. Storing the projector If you need to store the projector for an extended time, please follow the instructions below: • Make sure the temperature and humidity of the storage area are within the recommended range - ViewSonic LS800WU | LS800HD User Guide English - Page 73
, go to the ADVANCED > Light Source Setting > Light Source Mode menu and press / to select Eco. Setting Auto Power Off This function allows the projector to turn off automatically after a set period of time once no input source is detected to prevent unnecessary waste of light source life. 1. Open - ViewSonic LS800WU | LS800HD User Guide English - Page 74
if no input source is detected after 5 minutes to prevent unnecessary waste of light source life. You can further decide if you would like the projector to turn off automatically after a set period of time. 1. Open the OSD menu and go to the POWER MANAGEMENT > Smart Energy menu. 2. Press Enter and - ViewSonic LS800WU | LS800HD User Guide English - Page 75
Indicators Light Blue Red ON Flashing Flashing 7 blinks 8 blinks 9 blinks 9 blinks Off Off Off Off Off Off 1 blinks 2 blinks Off Off Off Off Off Off 4 blinks 6 blinks 6 blinks 6 blinks 6 blinks 6 blinks 6 blinks 1 blinks 2 blinks 3 blinks 4 blinks 5 blinks Off 1 blinks 2 blinks 3 blinks 4 - ViewSonic LS800WU | LS800HD User Guide English - Page 76
Troubleshooting The projector does not turn on. Cause Remedy There is no power from the power cord. Attempting to turn the projector on again during the cooling process. Plug the power cord into the AC inlet on the projector, and plug the power cord into the power outlet. If the power outlet - ViewSonic LS800WU | LS800HD User Guide English - Page 77
are subject to change without notice. • Not all models can be purchased in your region. General Product name Optical Resolution DLP Projector LS800HD: 1920 x 1080 1080p Display system Light source LS800WU: 1920 x 1200 WUXGA 1-CHIP DMD Laser Diode Electrical Power supply Power consumption - ViewSonic LS800WU | LS800HD User Guide English - Page 78
Environmental Requirements Operating temperature Operating relative humidity Operating altitude Storage temperature Storage humidity Storage altitude 5°C-40°C at sea level 10%-90% (without condensation) • 0-1499 m at 5°C-35°C • 1500-3000 m at 5°C-25°C (with High Altitude Mode on) -10°C to +60°C 10 - ViewSonic LS800WU | LS800HD User Guide English - Page 79
Timing chart Signal VGA SVGA XGA WXGA Quad-VGA SXGA SXGA+ WXGA+ UXGA WSXGA+ HD MAC 13" MAC 16" MAC 19" MAC 21" HDTV (1080p) Analog RGB Resolution (dots) Aspect Ratio 640 x 480 4:3 800 x 600 4:3 1024 x 768 4:3 1152 x 864 4:3 1280 x 768 15:9 1280 x 800 16:10 1360 x 768 16:9 1280 x - ViewSonic LS800WU | LS800HD User Guide English - Page 80
Signal VGA SVGA XGA WXGA Quad-VGA SXGA SXGA+ WXGA+ WSXGA+ HDTV (1080p) HDTV (1080i) HDTV (720p) SDTV (480p) SDTV (576p) SDTV (480i) SDTV (576i) HDMI Resolution (dots) Aspect Ratio 640 x 480 4:3 800 x 600 4:3 1024 x 768 4:3 1280 x 768 15:9 1280 x 800 16:10 1360 x 768 16:9 1280 x 960 - ViewSonic LS800WU | LS800HD User Guide English - Page 81
for Side-by-Side, Top-Bottom, and Frame Sequential formats. ** 120 Hz signals are supported for Frame Sequential format only. *** Video signal (SDTV 480i) is supported for Frame Sequential format only. In Frame packing format Signal 1080p 720p In Side by side format Signal 1080i In Top and - ViewSonic LS800WU | LS800HD User Guide English - Page 82
Signal HDTV (1080p) HDTV (1080i) HDTV (720p) SDTV (480p) SDTV (576p) SDTV (480i) SDTV (576i) Signal NTSC PAL PAL60 SECAM Component video Resolution (dots) Aspect Ratio 1920 x 1080 16:9 1920 x 1080 16:9 1280 x 720 16:9 720 x 480 4:3 / 16:9 720 x 576 4:3 / 16:9 720 x 480 4:3 / 16:9 720 - ViewSonic LS800WU | LS800HD User Guide English - Page 83
language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of ViewSonic Corporation. Disclaimer ViewSonic Corporation makes no representations or warranties, either expressed or implied, with respect to the - ViewSonic LS800WU | LS800HD User Guide English - Page 84
Appendix IR control table Key (with Blue back light) Power On Power Off COMP HDMI HDMI2 HDMI3 HDBaseT Source Auto sync Up / V keystone + Blank Left / H keystone Enter Right / H keystone + Menu Down / V keystone Exit Information Aspect ratio Help PgUp / ID 1 Volume+ / ID 2 Zoom + / ID 3 PgDn / ID 4 - ViewSonic LS800WU | LS800HD User Guide English - Page 85
RS232 command table Pin Description Pin Description 1 NC 2 RX 3 TX 4 NC 5 GND 6 NC 7 RTSZ 8 CTSZ 9 NC Baud Rate Data Length Parity Check Stop Bit Flow Control RS-232 protocol 115200 bps (default) 8 bit None 1 bit None When - ViewSonic LS800WU | LS800HD User Guide English - Page 86
Power Off Write Read High Altitude Mode Write Read Light Source Mode Write Read Message Write Read Action ON OFF Status Execute Execute Black Blue ViewSonic Status OFF ON Status OFF ON Status Normal Eco Status OFF ON Status Command 0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x00 0x00 0x5D 0x06 - ViewSonic LS800WU | LS800HD User Guide English - Page 87
Function Type Projector Position Write Read 3D Sync Write Read 3D Sync Invert Write Read Contrast Write Read Brightness Write Read Action Front Table Rear Table Rear Ceiling - ViewSonic LS800WU | LS800HD User Guide English - Page 88
Function Type Aspect ratio Write Auto Adjust Read Write Horizontal position Write Read Vertical position Write Read Color temperature Write Read Blank Write Read Action Auto 4:3 16:9 16:10 2.35:1 Cycle Get Value Execute Shift Right Shift Left Get Value Shift Up Shift Down Get Value - ViewSonic LS800WU | LS800HD User Guide English - Page 89
Function Keystone- Vertical Type Write Read Color mode Write Read Primary Color Write Read Write Hue Read Action Decrease Increase Get value Brightest Movie Standard Cycle Photo Presentation Status R G B C M Y Status Decrease Increase Get value Command 0x06 0x14 0x00 0x04 0x00 0x34 0x12 - ViewSonic LS800WU | LS800HD User Guide English - Page 90
Function Saturation Type Write Read Gain Write Read Sharpness Write Read Freeze Write Read Source input Write Read Quick Auto Search Write Read Action Decrease Increase Get value Decrease Increase Get value Decrease Increase Get value ON OFF Status D-Sub / Comp. HDMI 1 HDMI 2 HDMI 3 - ViewSonic LS800WU | LS800HD User Guide English - Page 91
Function Mute Type Write Read Volume Write Read Language Write Action ON OFF Status Increse Decrese Write Value Get Value Command 0x06 0x14 0x00 0x04 0x00 0x34 0x14 0x00 0x01 0x61 0x06 0x14 0x00 0x04 0x00 0x34 0x14 0x00 0x00 0x60 0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x14 0x00 0x61 0x06 - ViewSonic LS800WU | LS800HD User Guide English - Page 92
Function Type Language Write Light Source Hours Reset Read Write Read HDMI Format Write Read HDMI Range Write Read Action Vie Status Reset to ZERO Get Usage Time RGB YUV Auto Status Enhanced Normal Auto Status Command 0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x0d 0x6E 0x06 0x14 0x00 0x04 - ViewSonic LS800WU | LS800HD User Guide English - Page 93
Function CEC Error status Type Write Read Read Brilliant Color Write Read Remote Control Code Write Action OFF ON Status Status OFF Color 1 Color 2 Color 3 Color 4 Color 5 Color 6 Color 7 Color 8 Color 9 Color 10 Status code 1 code 2 code 3 code 4 code 5 code 6 88 Command 0x06 0x14 0x00 0x04 - ViewSonic LS800WU | LS800HD User Guide English - Page 94
Function Type Remote Control code Write Read Screen Color Write Read Over Scan Write Read Action code 7 code 8 Status OFF Blackboard Greenboard Whiteboard Status OFF Value 1 Value 2 Value 3 Value 4 Value 5 Get Value Command 0x06 0x14 0x00 0x04 0x00 0x34 0x0C 0x48 0x06 0xA6 0x06 0x14 0x00 - ViewSonic LS800WU | LS800HD User Guide English - Page 95
Function Type Remote Key Write AMX Write Action Menu Exit Top Bottom Left Right Source Enter Auto AMX response Command 0x02 0x14 0x00 0x04 0x00 0x34 0x02 0x04 0x0F 0x61 0x02 0x14 0x00 0x04 0x00 0x34 0x02 0x04 0x13 0x65 0x02 0x14 0x00 0x04 0x00 0x34 0x02 0x04 0x0B 0x5D 0x02 0x14 0x00 0x04 0x00 - ViewSonic LS800WU | LS800HD User Guide English - Page 96
.com/eu/support/call-desk/ Hong Kong www.hk.viewsonic.com T= 852 3102 2900 [email protected] India www.in.viewsonic.com T= 1800 419 0959 [email protected] Korea ap.viewsonic.com/kr/ T= 080 333 2131 [email protected] Latin America) www.viewsonic.com/la - ViewSonic LS800WU | LS800HD User Guide English - Page 97
local ViewSonic RI¿FHIRUWKHZDUUDQW\LQIRUPDWLRQ Limited One (1) year Heavy Usage Warranty: Under heavy usage settings, where a projector's ]HGSURGXFWPRGL¿FDWLRQRUIDLOXUHWRIROORZ instructions supplied with the product. E2SHUDWLRQRXWVLGHRISURGXFW , and set-up service charges. 92 - ViewSonic LS800WU | LS800HD User Guide English - Page 98
, contact ViewSonic Customer Support (please refer to "Customer Support" page). You will need to provide your product's serial number. 2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem - ViewSonic LS800WU | LS800HD User Guide English - Page 99
period of time. 4. Removal, installation, insurance, and set-up service charges. How to get service: For information about receiving service under warranty, contact ViewSonic Customer Support (Please refer to the attached Customer Support page). You will need to provide your product's serial number - ViewSonic LS800WU | LS800HD User Guide English - Page 100
Centro 39300 Acapulco, Guerrero Tel: 744-48-32627 Monterrey: Global Product Services Mar Caribe # 1987, Esquina con Golfo Pérsico Fracc. Bernardo Reyes, USA SUPPORT: ViewSonic Corporation 14035 Pipeline Ave. Chino, CA 91710, USA Tel: 800-688-6688 E-Mail: http://www.viewsonic.com Projector Mexico - ViewSonic LS800WU | LS800HD User Guide English - Page 101
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
 |
 |
LS800WU/LS800HD
DLP Projector
User Guide
Model No. VS17078/VS17079
IMPORTANT: Please read this User Guide to obtain important information on installing
and using your product in a safe manner, as well as registering your product for future
service.
Warranty information contained in this User Guide will describe your limited
coverage from ViewSonic Corporation, which is also found on our web site at http://
ZZZ±YLHZVRQLF±FRP LQ (QJOLVK² RU LQ VSHFL¿F ODQJXDJHV XVLQJ WKH 5HJLRQDO VHOHFWLRQ
box in the upper right corner of our website. “Antes de operar su equipo lea cu
idadosamente las instrucciones en este manual”