ViewSonic LS850WU - 5000 Lumens WUXGA Networkable Laser Projector with 1.6x Opti - Page 21
Mounting the Projector, Screw type: M4
View all ViewSonic LS850WU - 5000 Lumens WUXGA Networkable Laser Projector with 1.6x Optical Zoom manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
151 Mounting the Projector NOTE: If you buy a third-party mount, please use the correct screw size. Screw size can vary depending on the thickness of the mounting plate. 1. To ensure the most secure installation, please use a ViewSonic® wall or ceiling mount. 2. Ensure the screws used to attach a mount to the projector meet the following specifications: • Screw type: M4 • Screw length: 12.8 mm ~ 15.8 mm 304 NOTE: • Avoid installing the projector near a heat source. • Keep at least a 10 cm gap between the ceiling and the bottom of the projector. 21
21
Mounting the Projector
NOT±:
If you buy a third-party mount, please use the correct screw size. Screw size
can vary depending on the thickness of the mounting plate.
1.
To ensure the most secure installation, please use a ViewSonic® wall or ceiling
mount.
2.
Ensure the screws used to attach a mount to the projector meet the following
specifications:
•
Screw type: M4
•
Screw length: 12.8 mm ~ 15.8 mm
151
304
NOT±:
•
Avoid installing the projector near a heat source.
•
Keep at least a 10 cm gap between the ceiling and the bottom of the
projector.