ViewSonic LS850WU - 5000 Lumens WUXGA Networkable Laser Projector with 1.6x Opti - Page 72
LAN Control Settings, Light Source Settings, Only available when Light Source Mode is
View all ViewSonic LS850WU - 5000 Lumens WUXGA Networkable Laser Projector with 1.6x Optical Zoom manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Menu Option LAN Control Settings Description LAN Settings ͫͫ DHCP ON: Select this if you are in a DHCP environment and Projector IP Address, Subnet Mask, Default Gateway, DNS Server settings will be automatically retrieved. ͫͫ Static IP: Select this if you are in a non-DHCP environment and make adjustments to below settings. Projector IP Address Subnet Mask Default Gateway DNS Server Only available when LAN Settings is set to Static IP. Use / to select a column and use / to adjust the value. Standby LAN Control Allows the projector to provide the network function in standby mode. Apply Enacts the settings. Light Source Settings Light Source Mode ͫͫ Normal: Provides full light source brightness. ͫͫ Eco: Reduces light source power consumption by 30% and lowers brightness to decrease the fan noise. ͫͫ Dynamic Eco: Reduces light source power consumption by up to 30% depending on the content brightness level. ͫͫ Custom: Allows you to adjust the light source power. Light Source Power Only available when Light Source Mode is Custom. Reset Light Source Hours Resets the light source timer after new light source is installed. For changing the light source, please contact qualified service personnel. Light Source Hours Information ͫͫ Light Source Usage Time: Displays the number of hours the light source has been used. 72