ViewSonic PJ359w User Guide - Page 15
Connecting power supply, Using the security slot
UPC - 766907312812
View all ViewSonic PJ359w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Setting up Connecting power supply 1. Put the connector of the power cord into the AC inlet of the projector. POWER indicator POWER 2. Firmly plug the power cord's plug into the outlet. In a couple of seconds after the power supply connection, the POWER indicator will light up in steady orange. AC inlet AC IN Connector of the power cord to the outlet Please remember that when the AUTO ON function (38) activated, the connection of the power supply make the projector turn on. WARNING ►Please use extra caution when connecting the power cord, as incorrect or faulty connections may result in fire and/or electrical shock. • Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one. • Only plug the power cord into an outlet rated for use with the power cord's specified voltage range. The power outlet should be close to the projector and easily accessible. Remove the power cord for complete separation. • Never modify the power cord. Using the security slot This product has the security slot for the Kensington lock. For details, see the manual of the security tool. WARNING ►Do not use the security slot to prevent the projector from falling down, since it is not designed for it. Security slot NOTE • The security slot is not comprehensive theft prevention measures. It is intended to be used as supplemental theft prevention measure. ViewSonic 10 PJ359W