ViewSonic PJ359w User Guide - Page 22

Operating Using the automatic adjustment feature 1. Press the AUTO button on the remote control. Pressing this button performs the following. AUTO button  For a PC signal The vertical position, the horizontal position, the horizontal phase and the horizontal size will be automatically adjusted. And the aspect ratio will be automatically set to default. Make sure that the application window is set to its maximum size MY SOURCE/ VIDEO COMPUTER DOC.CAMERA ASPECT AUTO SEARCH BLANK MAGNIFY FREEZE PAGE VOLUME ON UP 㧗 DOWN OFF ࡯ KEYSTONE MY BUTTON MUTE 1 2 prior to attempting to use this feature. A dark picture may still be incorrectly adjusted. Use a bright picture when adjusting. POSITION MENU ENTER  For a video signal, s-video signal or component video signal ESC RESET The video format best suited for the respective input signal will be selected automatically. This function is available only when the AUTO is selected for the VIDEO FORMAT item in the INPUT menu (29). The vertical position, horizontal position and aspect ratio will be automatically set to the default. For a component video signal, also the horizontal phase will be automatically set to the default. ● The automatic adjustment operation requires about 10 seconds. Also please note that it may not function correctly with some input. When this function is performed for a video signal, a certain extra such as a line may appear outside a picture. MY SOURCE/ VIDEO COMPUTER DOC.CAMERA ASPECT AUTO SEARCH BLANK Adjusting the position 1. Press the POSITION button on the remote control. The "POSITION" indication will appear on the screen. MAGNIFY FREEZE PAGE VOLUME UP ON 㧗 DOWN OFF ࡯ KEYSTONE MY BUTTON MUTE 1 2 2. Use the cursor buttons to adjust the picture position. POSITION MENU ENTER When you want to reset the operation, press the RESET button ESC RESET on the remote control during the operation. To complete this operation, press the POSITION button again. Even if you do not do anything, the dialog will automatically POSITION button disappear after a few seconds. ● When this function is performed on a video signal, s-video signal or component video signal, some image such as an extra-line may appear at outside of the picture. ● When this function is performed on a video signal, s-video signal, or component video signal, the range of this adjustment depends on the OVER SCAN in the IMAGE menu (26) setting. It is not possible to adjust when the OVER SCAN is set to 10. ViewSonic 17 PJ359W