ViewSonic PJ359w User Guide - Page 23

Operating Correcting the keystone distortions KEYSTONE button 1. Press the KEYSTONE button on the remote control. A dialog will appear on the screen to aid you in correcting the distortion. 2. Use the ▲/▼ cursor buttons to select the AUTO or MANUAL operation, and press the ► button to perform the following. (1) The AUTO executes automatic vertical keystone correction. MY SOURCE/ VIDEO COMPUTER DOC.CAMERA ASPECT AUTO SEARCH BLANK MAGNIFY FREEZE PAGE VOLUME UP ON 㧗 DOWN OFF ࡯ KEYSTONE MY BUTTON MUTE 1 2 (2) The MANUAL displays a dialog for keystone correction. Use the ▲/▼ buttons for adjustment. POSITION MENU ENTER To close the dialog and complete this operation, press the KEYSTONE button ESC RESET again. Even if you do not do anything, the dialog will automatically disappear after a few seconds. ● The adjustable range of this correction will vary among inputs. For some input, this function may not work well. ● When V:INVERT or H&V:INVERT is selected to the MIRROR item in the SETUP menu, if the projector screen is inclined or angled downward, this function may not work correctly. ● When the zoom adjustment is set to the TELE (telephoto focus), the automatic keystone distortion correction may be excessive. This function should be used when the zoom adjustment is set to the full WIDE (wide-angle focus) whenever possible. ● When the projector is placed on the level (about ±3°), the automatic keystone distortion correction may not work. ● When the projector is inclined to near ±30 degree or over, this function may not work well. ● This function will be unavailable when Transition Detector is on (47). Using the magnify feature MAGNIFY 1. Press the ON button of MAGNIFY on the remote control. ON/OFF button The "MAGNIFY" indication will appear on the screen (although the indication will disappear in several seconds with no MY SOURCE/ VIDEO COMPUTER DOC.CAMERA operation), and the projector will go into the MAGNIFY mode. ASPECT AUTO SEARCH BLANK 2. Use the ▲/▼ cursor buttons to adjust the zoom level. To move the zoom area, press the POSITION button in the MAGNIFY mode, then use the cursor buttons to move the MAGNIFY FREEZE PAGE VOLUME UP ON 㧗 DOWN OFF ࡯ KEYSTONE MY BUTTON MUTE 1 2 area. And to finalize the zoom area, press the POSITION button again. POSITION MENU To exit from the MAGNIFY mode and restore the screen to normal, press the ENTER OFF button of MAGNIFY on the remote control. ESC RESET ● The projector automatically exits from the MAGNIFY mode when the input signal is changed, or when the display condition is changed. ● Although in the MAGNIFY mode, the keystone distortion condition may vary, it will be restored when the projector exits from the MAGNIFY mode. NOTE • The zoom level can be finely adjusted. Closely watch the screen to find the level you want. ViewSonic 18 PJ359W