ViewSonic PJ759 User Guide
ViewSonic PJ759 - 63 Tft LCD Projector Manual
 |
UPC - 766907274615
View all ViewSonic PJ759 manuals
Add to My Manuals
Save this manual to your list of manuals |
ViewSonic PJ759 manual content summary:
- ViewSonic PJ759 | User Guide - Page 1
ViewSonic® PJ758/PJ759/PJ760 LCD Projector - User Guide - Guide de l'utilisateur - Bedienungsanleitung - Guía del usuario - Guida dell'utente - Guia do usuário - Användarhandbok - Käyttöopas Model No. : VS11862/VS11861/VS11822 - ViewSonic PJ759 | User Guide - Page 2
if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more law. ViewSonic i PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 3
guide for further instructions. 7. Do not block any ventilation openings. Install the unit in accordance with the manufacturer's instructions an electrician for replacement of the obsolete Refer all servicing to qualified service personnel. Servicing is required when ViewSonic ii PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 4
below: Examples of exempted components are: 1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not specifically mentioned in the Annex of RoHS Directive. 2. Lead in weight and as a cooper alloy containing up to 4% lead by weight. ViewSonic iii PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 5
Name: Model Number: Document Number: Serial Number: Purchase Date: PJ758/PJ759/PJ760 ViewSonic LCD Projector VS11862/VS11861/VS11822 PJ758_PJ759_PJ760_UG_ENG Rev. 1A 03-29-07 Personal Identification Number (PIN): The lamp in this product contains mercury. Please dispose of in accordance with - ViewSonic PJ759 | User Guide - Page 6
Projector PJ758/PJ759/PJ760 User's Manual (detailed) Operating Guide (1) Projector (2) Remote control with two AA batteries (1) (3) Power cord (4) RGB cable (5) Audio/Video cable (6) Soft case (7) Quick Start Guide and ViewSonic Wizard CD (8) Lens cover and Strap (6) VIDEO RGB SEARCH - ViewSonic PJ759 | User Guide - Page 7
TIME, MY BUTTON, SERVICE, SECURITY Searching an input signal 17 Maintenance 51 Selecting an aspect ratio 17 Lamp 51 Adjusting the projector's elevator . .18 Air filter 53 Adjusting the zoom and focus . . . . .18 Other care 54 Using the automatic adjustment feature . .19 Troubleshooting 55 - ViewSonic PJ759 | User Guide - Page 8
and low noise. These features provide you with the broad use of this projector. Preparations Contents of package Please see the "Contents of package" in the "User's Manual (concise)" which is a book. Your projector should come with the items shown there. Contact immediately your dealer if anything - ViewSonic PJ759 | User Guide - Page 9
Part names Part names Projector (1) Lamp cover ( 51) The lamp unit is inside. (2) Focus ring ( 18) (3) Zoom ring ( 18) (4) Control panel ( 5) (5) Elevator buttons (x 2) ( 18) (6) Elevator feet (x 2) ( 18) (7) Remote sensor ( 13) (8) Lens ( 18, 54) (9) Lens cover ( 3) (10) Intake vents (11) Filter - ViewSonic PJ759 | User Guide - Page 10
( 56) (6) LAMP indicator ( 56) Rear projector from falling down, since it is not designed for it. ►Use the shutdown switch only when the projector is not turned off by normal procedure, since pushing this switch stops operation of the projector without cooling it down. ViewSonic 5 PJ758/PJ759 - ViewSonic PJ759 | User Guide - Page 11
Part names Remote control (1) VIDEO button ( 17) (2) COMPUTER button ( 16) (3) SEARCH button ( 17) (4) STANDBY/ON button ( 15) (5) ASPECT button ( 17) (6) AUTO ENTER RESET (3) (4) (6) (7) (12) (14) (15) (13) (19) (18) (21) (23) (25) Back of the remote control (26) ViewSonic 6 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 12
ceiling • Keep a space of 30 cm or more between the sides of the projector and other objects such as walls. • Consult with your dealer before a special 152 c2 Screen height cm inch -1 0 -2 -1 -2 -1 -2 -1 -3 -1 -3 -1 -4 -1 -4 -2 -5 -2 -6 -2 -8 -3 -10 -4 -12 -5 ViewSonic 7 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 13
4.9 195 6.0 235 193 76 6.6 261 8.0 314 257 101 8.3 326 10.0 392 322 127 9.9 391 12.0 471 386 152 c2 Screen height cm inch -1 0 -2 -1 -2 -1 -2 -1 -3 -1 -3 -1 -4 -1 -4 -2 -5 -2 -6 -2 -8 -3 -10 -4 -12 -5 ViewSonic 8 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 14
the projector in such places could cause fire, electric shock and/or malfunction of the projector. • Do not place the projector near humidifiers, smoking spaces or a kitchen. ►Position the projector to prevent light from directly hitting the projector's remote sensor. ViewSonic 9 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 15
manuals for devices before connecting them to the projector WARNING ►Do not disassemble or modify the projector and accessories. ►Be careful not to damage projector. Connecting a live device to the projector and the projector. ►Use appropriate with the core to the projector. ►Make sure that devices are - ViewSonic PJ759 | User Guide - Page 16
projector, be sure to activate the PC's external RGB output. (Set the laptop PC to CRT display or to simultaneous LCD and CRT display.) For details on how this is done, please refer to the instruction manual in your pc as this projector is a Plug-and-Play monitor. ViewSonic 11 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 17
diameter can be attached to the security bar on the projector. Also this product has the security slot for the Kensington lock. For details, see the manual of the security tool. WARNING ►Do not use the is intended to be used as supplemental theft prevention measure. ViewSonic 12 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 18
remote control may not work correctly if strong light (such as direct sun light) or light from an extremely close range (such as from an inverter fluorescent lamp) shines on the remote sensor of the projector. Adjust the position of projector avoiding those lights. ViewSonic 13 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 19
(2) Set to Mode 2:HIGH... MAGNIFY OFF and ESC buttons Please remember that the REMOTE FREQ. in the SERVICE item of the OPTION menu ( 44) of the projector to be controlled should be set to the same mode as the remote control. (2) VIDEO COMPUTER SEARCH ASPECT AUTO BLANK MAGNIFY ON HOME PAGE UP - ViewSonic PJ759 | User Guide - Page 20
off the power 1. Press the STANDBY/ON button on the projector or the remote control. The message "Power off?" will appear on the screen for about 5 seconds. 2. Press the STANDBY/ON button again while the message appears. The projector lamp will go off, and the POWER indicator will begin blinking in - ViewSonic PJ759 | User Guide - Page 21
remote projector will check COMPUTER IN1 port first. If no input is detected at the port, the projector will check COMPUTER IN2 port. MAGNIFY ON HOME PAGE UP VOLUME OFF END PAGE DOWN MUTE FREEZE MY BUTTON KEYSTONE 1 2 POSITION MENU (continued on next page) ViewSonic 16 PJ758/PJ759 - ViewSonic PJ759 | User Guide - Page 22
2 POSITION MENU Selecting an aspect ratio 1. Press ASPECT button on the remote control. Each time you press the button, the projector switches the mode for aspect ratio in turn. € For a computer is inputted. ● NORMAL mode keeps the original aspect ratio setting. ViewSonic 17 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 23
projector exceeding the restriction could cause malfunction or shortening the lifetime of consumables, or the projector itself. Adjusting the zoom and focus 1. Use the zoom ring to adjust the screen size. 2. Use the focus ring to focus the picture. Focus ring Zoom ring ViewSonic 18 PJ758/PJ759 - ViewSonic PJ759 | User Guide - Page 24
FINE or DISABLE is selected for AUTO ADJUST item of SERVICE item in OPTION menu ( 43). Adjusting the position 1. Press POSITION button on the remote control when no menu is indicated. The "POSITION" displayed picture does not move its position but the menu does. ViewSonic 19 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 25
MANUAL if the projector screen is projector is placed on the level (about ±0°), the automatic keystone distortion correction may not work. ● When the projector remote control. The "MAGNIFY" indication will appear on the screen and the projector remote control. ● The projector projector exits from the - ViewSonic PJ759 | User Guide - Page 26
long time, the LCD panel might possibly be burned in. Do not leave the projector in the FREEZE mode for too long. Temporarily blanking the screen 1. Press BLANK button on the remote control. The blank screen function. If necessary, set the volume or mute first. ViewSonic 21 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 27
HOME VIDEO ASPECT ON MAGNIFY FREEZE OFF POSITION 1. Press the MENU button on the remote control or the projector. The Advanced Menu or EASY MENU, which has priority just after powered on will buttons to operate the item. (continued on next page) EASY MENU ViewSonic 22 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 28
displayed. ● When you want to reset the operation, press RESET button on the remote control during the operation. Note that some items (ex. LANGUAGE, H PHASE, the ◄ cursor button or ESC button on the remote control. 5. Press MENU button on the remote control again to close the menu and complete - ViewSonic PJ759 | User Guide - Page 29
( 26) and COLOR TEMP ( 26) items in PICTURE menu. • When this function is performed, a certain extra such as a line may appear. (continued on next page) ViewSonic 24 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 30
"Go to Advanced Menu..." on the menu, and press the ► or ENTER button to use the menu of PICTURE, IMAGE, INPUT, SETUP, SCREEN or OPTION. ViewSonic 25 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 31
the ▲/▼ buttons adjusts the tint. Greenish Ù Reddish • This item can be selected only for a video signal, s-video or component video signal. (continued on next page) ViewSonic 26 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 32
the screen may flicker for a moment when an adjustment is made. This is not a malfunction. This projector has 4 memories for adjustment data (for all the items of PICTURE menu). Selecting a function using the ▲/▼ will be lost by saving a new data into the memory. ViewSonic 27 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 33
the color intensity on the whole tones of the test pattern. GAIN adjustments mainly affect color intensity on the brighter tones of the test pattern. ViewSonic 28 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 34
this adjustment depends on OVER SCAN ( above) setting. It is not possible to adjust when OVER SCAN is set to 10. (continued on next page) ViewSonic 29 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 35
as a line may appear outside a picture. • The items adjusted by this function may vary when FINE or DISABLE is selected for AUTO ADJUST item of SERVICE item in OPTION menu ( 43). ViewSonic 30 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 36
selected, COMPONENT (Y, Cb/Pb, Cr/ Pr) and VIDEO ports will function as a SCART RGB port. A SCART cable is required for a SCART RGB input to the projector. For your reference, see the TECHNICAL part. (continued on next page) ViewSonic 31 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 37
. In such a case, remove the signal connector first and select SYNC ON G OFF on the menu, and then reconnect the signal. (continued on next page) ViewSonic 32 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 38
RESOLUTION Description The resolution for the COMPUTER IN1 and IN2 input signals can be set on this projector. (1) In INPUT menu select RESOLUTION using the ▲/▼ buttons and press the ► button. The . CUSTOM ↓ • For some pictures, this function may not work well. ViewSonic 33 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 39
This function will be executed only once when selected in the menu. When the slant of the projector is changed, execute this function again. • The adjustable range for correction will vary among inputs. the Transition Detector is on ( 49). (continued on next page) ViewSonic 34 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 40
Detector is TURN ON and MIRROR status is changed, Transition Detector Alarm ( 49) will be displayed when projector is restarted after the power switch is turned off. Using the ▲/▼ buttons adjusts the volume. High Ù input port, and any items in AUDIO menu are invalid. ViewSonic 35 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 41
Using the buttons adjusts the menu position. To quit the operation, press MENU button on the remote control or keep no operation for about 10 seconds. Using the ▲/▼ buttons switches the mode to the plain black screen after several minutes. (continued on next page) ViewSonic 36 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 42
ON is selected to the MyScreen PASSWORD of SECURITY item in OPTION menu ( 46), the START UP is fixed to MyScreen. (continued on next page) ViewSonic 37 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 43
. • This function cannot be selected when TURN ON is selected to the MyScreen PASSWORD of SECURITY item in OPTION menu ( 46). (continued on next page) ViewSonic 38 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 44
if the picture is freezing. Do not mistake freezing for a malfunction ( 21). Each input port for this projector can have a name applied to it. (1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME the ESC or ◄ button and the INPUT button simultaneously. ViewSonic 39 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 45
to the projector while the lamp is off. • After turning the lamp on by the AUTO ON function, if neither input nor operation is detected for about 30 minutes, the projector is turned off, even though the AUTO OFF function ( 41) is disabled. (continued on next page) ViewSonic 40 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 46
projector lamp will be turned off. If one of the projector's buttons or the remote lamp time only when you have replaced the lamp, for a suitable indication about the lamp. • For the lamp replacement, see the section "Lamp time only when you have cleaned or replaced the air filter, for a suitable - ViewSonic PJ759 | User Guide - Page 47
displays the SERVICE menu. REMOTE FREQ. FAN SPEED Using the ▲/▼ buttons switches the rotation speed of the cooling fans. The HIGH is the mode for use at highlands etc. Note that the projector is noisier when the HIGH is selected. HIGH Ù NORMAL (continued on next page) ViewSonic 42 PJ758/PJ759 - ViewSonic PJ759 | User Guide - Page 48
depending on the basic setting. FINE Ù FAST Ù DISABLE SERVICE (continued) FINE: Finer tuning including H.SIZE adjustment. FAST: projector. • Please be careful with the operating environment of the projector and the condition of the air filter. (continued on next page) ViewSonic 43 PJ758/PJ759 - ViewSonic PJ759 | User Guide - Page 49
does not have any effect on the remote control. REMOTE FREQ. Use the ▲/▼ button to change the projector's remote sensor setting. 1:NORMAL Ù 2:HIGH Items the items LAMP TIME, FILTER TIME, LANGUAGE and SECURITY are not reset. RESET Õ CANCEL (continued on next page) ViewSonic 44 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 50
OPTION Menu OPTION Menu (continued) Item SECURITY Description This projector is equipped with security functions. User registration is required before using the security functions. Please contact your • Please do not forget your PASSWORD. (continued on next page) ViewSonic 45 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 51
3 seconds or press and hold the INPUT and ► buttons on the projector for about 3 seconds. The 10-digit Inquiring Code will be displayed. digit Inquiring Code. Your PASSWORD will be sent after your user registration information is confirmed. 2. Using the MyScreen ) ViewSonic 46 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 52
the projector from being used unless a registered Code is input. 3.1 Registering the PIN Code 3.1-1 Use the ▲/▼ buttons on the SECURITY menu to select PIN LOCK and press the ► button or the ENTER button to display the PIN LOCK on/off menu. (continued on next page) ViewSonic 47 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 53
. • If it passes for about 5 minutes after the PIN BOX is displayed the projector will turn off. 3.3-2 Contact your dealer with the 10-digit Inquiring Code. Your PASSWORD will be sent after your user registration information is confirmed. (continued on next page) ViewSonic 48 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 54
the Transition Detector ALARM is displayed for about 5 minutes the lamp will turn off. This function will activate only when the projector is started after turning off the AC power. 4.2 Setting the AGAIN box, enter the same PASSWORD again. (continued on next page) ViewSonic 49 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 55
-digit Inquiring Code will be displayed inside the box. 4.4-3 Contact your dealer with the 10-digit Inquiring Code. Your PASSWORD will be sent after your user registration information is confirmed. ViewSonic 50 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 56
"RESET" on the dialog. It performs resetting the lamp time. CAUTION ►Do not touch any inner space of the projector, while the lamp is taken out. NOTE • Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp. ViewSonic 51 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 57
In addition, working in high places is dangerous, so ask your local dealer to have the lamp replaced even if the bulb is not broken. • Do not use the projector with the lamp cover removed. At the lamp replacing, make sure that the screws are screwed in firmly. Loose screws could result in damage or - ViewSonic PJ759 | User Guide - Page 58
reset the filter time only when you have cleaned or replaced the air filter, for a suitable indication about the air filter. • The projector may display the message such as "CHECK THE AIR FLOW" or turn off the projector, to prevent the internal heat level rising. ViewSonic 53 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 59
projector according to the following. Incorrect care could cause not only an injury but adverse influence such as discoloration, peeling paint, etc. ►Do not use cleaners or chemicals other than those specified in this manual. ►Do not polish or wipe with hard objects. ViewSonic 54 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 60
Troubleshooting Troubleshooting If an abnormal operation should occur, stop using the projector immediately. WARNING ►Never use the projector service company. Otherwise if a problem occurs with the projector specs for your projector or the signal source specs. CHECK SERVICE this manual. FILTER - ViewSonic PJ759 | User Guide - Page 61
displayed after the remedy, please contact your dealer or service company. Blinking In Red or Lighting In Red Turned Blinking off In Red (continued on next page) ViewSonic The cooling fan is not operating. Please turn the power off, and allow the projector to cool down at least 20 minutes. After - ViewSonic PJ759 | User Guide - Page 62
overheated, for safety purposes, the projector is automatically shut down, and the indicator lamps may also be turned off. In SERVICE item in OPTION menu ( 44) can reset all settings(except LANGUAGE, FILTER TIME, LAMP TIME, FILTER MESSAGE and etc.) to the factory default. ViewSonic 57 PJ758/PJ759 - ViewSonic PJ759 | User Guide - Page 63
Troubleshooting allow the projector to cool down at least 10 minutes, then turn the power on again. Either there is no lamp and/or lamp cover, or Restore the sound pressing MUTE or VOLUME button on the remote control. The volume is adjusted to an extremely low level. ) ViewSonic 58 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 64
Troubleshooting pictures are The computer cannot detect the projector as a plug displayed. (continued) and . Press BLANK button on the remote control. 21 Video screen The FREEZE 35 The lamp is approaching the end of its product lifetime. Replace the lamp. 51, ViewSonic 59 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 65
Specifications Specifications Specification Item Specification Product name Liquid crystal projector Liquid Crystal Panel Panel size 1.6 cm (0.63 type) Drive system TFT D-sub 9 pin x1 Lamp: RLC-031 Air filter: For more information, please consult your dealer. ViewSonic 60 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 66
Specifications Specifications (continued) [unit: mm] ViewSonic 61 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 67
909-444-5655 [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] www.viewsoniceurope.com/uk/Support/Calldesk.htm Europe - ViewSonic PJ759 | User Guide - Page 68
, contact ViewSonic Customer Support (please refer to "Customer Support" page). You will need to provide your product's serial number. 2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem - ViewSonic PJ759 | User Guide - Page 69
ViewSonic or your local ViewSonic dealer. The warranty period for this product in mainland China (Hong Kong, Macao and Taiwan Excluded) is subject to the terms and conditions of the Maintenance Guarantee Card. 4.3: Projector Warranty ViewSonic PRJ_LW01 Rev. 1g 06-30-06 64 PJ758/PJ759/PJ760 - ViewSonic PJ759 | User Guide - Page 70
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
 |
 |
ViewSonic
®
PJ758/PJ759/PJ760
LCD Projector
- User Guide
- Guide de l’utilisateur
- Bedienungsanleitung
- Guía del usuario
- Guida dell’utente
- Guia do usuário
- Användarhandbok
- Käyttöopas
-
Руководство
пользователя
-
使用手冊 (繁體)
-
使用手冊 (簡體)
-
사용자 안내서
Model No. : VS11862/VS11861/VS11822