ViewSonic PJ759 User Guide - Page 36

INPUT Menu INPUT Menu From the INPUT menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item PROGRESSIVE VIDEO NR Description Using the ▲/▼ buttons switches the progress mode. TV Ù FILM Ù TURN OFF • This function is performed only for an interlaced signal of a video, s-video or component video of 525i (480i) or 625i (576i) signal. • When TV or FILM is selected, the screen image will be sharp. FILM adapts to the 2-3 Pull-Down conversion system. But these may cause a certain defect (for example, jagged line) of the picture for a quick moving object. In such a case, please select TURN OFF, even though the screen image may lose the sharpness. Using the ▲/▼ buttons switches the noise reduction mode. HIGH Ù MID Ù LOW • This function performs only for a video, s-video or component video of 525i(480i) or 625i(576i) signal. • When this function is excessive, it may cause a certain degradation of the picture. Using the ▲/▼ buttons switches the mode for color space. AUTO Ù RGB Ù SMPTE240 Ù REC709 Ù REC601 COLOR SPACE • This item can be selected only for a computer signal or component video signal except SCART RGB signal. • The AUTO mode automatically selects the optimum mode. • The AUTO operation may not work well at some signals. In such a case, it might be good to select a suitable mode except AUTO. COMPONENT Using the ▲/▼ buttons switches the function of the COMPONENT (Y, Cb/Pb, Cr/Pr) port. COMPONENT Ù SCART RGB When the SCART RGB is selected, COMPONENT (Y, Cb/Pb, Cr/ Pr) and VIDEO ports will function as a SCART RGB port. A SCART cable is required for a SCART RGB input to the projector. For your reference, see the TECHNICAL part. (continued on next page) ViewSonic 31 PJ758/PJ759/PJ760