ViewSonic PJ759 User Guide - Page 25

Operating Correcting the keystone distortions 1. Press KEYSTONE button on the remote control. A dialog will appear on the screen to aid you in correcting the distortion. KEYSTONE 2. Use the ▲/▼ cursor buttons to select AUTO or MANUAL operation, and press the ► button to perform the following. (1) AUTO executes automatic vertical keystone correction. (2) MANUAL displays a dialog for keystone correction. Use the ▲/▼ buttons for adjustment. VIDEO COMPUTER SEARCH ASPECT AUTO BLANK MAGNIFY ON HOME PAGE UP VOLUME END PAGE DOWN MUTE OFF FREEZE MY BUTTON KEYSTONE 1 2 To close the dialog and complete this operation, press KEYSTONE button again. Even if you do not do anything, the dialog will automatically disappear after a few seconds. POSITION MENU ● The adjustable range of this correction will vary among inputs. For some input, this function may not work well. ● When V:INVERT or H&V:INVERT is selected for MIRROR item in SETUP menu, if the projector screen is inclined or angled downward, this function may not work correctly. ● When the zoom adjustment is set to TELE (telephoto focus), the automatic keystone distortion correction may be excessive. This function should be used when the zoom adjustment is set to the full WIDE (wide-angle focus) whenever possible. ● When the projector is placed on the level (about ±0°), the automatic keystone distortion correction may not work. ● When the projector is inclined to near ±30 degree or over, this function may not work well. ● This function will be unavailable when Transition Detector is on ( 49). Using the magnify feature 1. Press the ON button of MAGNIFY on the remote control. The "MAGNIFY" indication will appear on the screen and the projector will go into the MAGNIFY mode. The indication will disappear in several seconds with no operation. 2. Use the ▲/▼ cursor buttons to adjust the zoom level. To move the zoom area, press POSITION button in the MAGNIFY mode, then use the cursor buttons to move the area. And to finalize the zoom area, press POSITION button again. MAGNIFY ON/OFF VIDEO COMPUTER SEARCH ASPECT AUTO BLANK MAGNIFY ON HOME PAGE UP VOLUME OFF END PAGE DOWN MUTE FREEZE MY BUTTON KEYSTONE 1 2 To exit from the MAGNIFY mode and restore the screen to normal, POSITION MENU press the OFF button of MAGNIFY on the remote control. ● The projector automatically exits from the MAGNIFY mode when the input signal is changed or when the display condition is changed. ● In the MAGNIFY mode, the keystone distortion condition may vary, it will be restored when the projector exits from the MAGNIFY mode. NOTE • The zoom level can be finely adjusted. Closely watch the screen to find the level you want. ViewSonic 20 PJ758/PJ759/PJ760