ViewSonic WPD-100 User Guide - Page 46
Allow BW 40 MHz
View all ViewSonic WPD-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
2: SPAIN 3: FRANCE 4: MKK 5: MKKI (TELEC) 6: ISERAL (Channel 3 to 9) 7: ISERAL (Channel 5 to 13) Please note that only change the country code if you are in different country. For example: when operating this product in US, only channels 1~11 can be operated. Selection of other channels is not permitted under FCC regulations. No forwarding Check this box and wireless clients will not be able to among wireless share data with each other. clients Hide SSID Check this box and the SSID will not be broadcasted to the public. Your wireless clients must know the exact SSID to be able to connect to your computer. This option is useful to enhance security level. Allow BW 40 MHz Check this box to allow BW 40MHz capability. Beacon(ms) You can define the time interval that a beacon signal should be send. Default value is 100. Do not modify this value unless you know what will be affected. TX Power You can select the wireless output power here. Please select a proper output power setting according to your actual needs. You may not need 100% of output power if other wireless clients are not far from you. Idle Time Select the idle time for the wireless access point. Default value is 300. Do not modify this value unless you know what will be affected. To save changes, click 'Apply button. Or you can click 'Default' to reset all values to factory default value. ViewSonic WPD-100 40