ViewSonic X2 - 1080p Short Throw Projector with 3100 LED Lumens USB C BT Speaker - Page 30

Page 30 highlights

Selecting an Input Source The projector can be connected to multiple devices at the same time. However, it can only display one full screen at a time. If you want the projector to automatically search for the input source, ensure the Quick Auto Search function in the SYSTEM menu is On. NOTE: If no input source is detected, the projector will go to SMART SYSTEM. To manually select the input source do the following: 1. Press SOURCE or , and a source selection menu will appear. 2. Press / until your desired signal is selected and press ENTER/OK. 3. Once detected, the selected source information will be displayed on the screen for a few seconds. NOTE: If there are multiple devices connected to the projector, repeat steps 1-2 to search for another source. 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
26
Selecting an Input Source
The projector can be connected to multiple devices at the same time. However, it
can only display one full screen at a time.
If you want the projector to automatically search for the input source, ensure the
Quick Auto Search
function in the
SYSTEM
menu is
On
.
NOTE:
If no input source is detected, the projector will go to
SMART SYSTEM
.
To manually select the input source do the following:
1.
Press
SOURCE
or
, and a source selec°on menu will appear.
2.
Press
/
un°l your desired signal is selected and press
ENTER/OK
.
3.
Once detected, the selected source informa°on will be displayed on the screen
for a few seconds.
NOTE:
If there are mul°ple devices connected to the projector, repeat steps 1-2 to
search for another source.