ViewSonic X2000B-4K - 4K UHD Ultra Short Throw Laser Projector with 2000 Lumens - Page 17
Moun°ng the Projector
View all ViewSonic X2000B-4K - 4K UHD Ultra Short Throw Laser Projector with 2000 Lumens USB C BT Speakers and Wi-Fi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Mounting the Projector NOTE: If you buy a third party mount, please use the correct screw size. Screw size can vary depending on the thickness of the mounting plate. 1. To ensure the most secure installation, please use a ViewSonic® wall or ceiling mount. 2. Ensure the screws used to attach the mount to the projector meet the following specifications: • Screw type: M4 x 12 • Maximum Screw Length: 12 mm CAUTION: • Avoid installing the projector near a heat source or air conditioner. • Keep at least a 10 cm (3.9 in.) gap between the ceiling and the bottom of the projector. 17
17
Moun°ng the Projector
NOTE:
If you buy a third party mount, please use the correct screw size. Screw
size can vary depending on the thickness of the moun°ng plate.
1.
To ensure the most secure installa°on, please use a ViewSonic® wall or ceiling
mount.
2.
Ensure the screws used to a±ach the mount to the projector meet the following
specifica°ons:
• Screw type: M4 x 12
• Maximum Screw Length: 12 mm
CAUTION:
•
Avoid installing the projector near a heat source or air condi°oner.
•
Keep at least a 10 cm (3.9 in.) gap between the ceiling and the bo±om of
the projector.