Viking 18%20Inch%20H.%20Chimney%20Wall%20Hood Installation Instructions - Page 16
Installation, Duct Cover Option
View all Viking 18%20Inch%20H.%20Chimney%20Wall%20Hood manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Duct Cover Option (VWH 10" H./12"H. Wall Hoods w/Standard Ventilator) 1 2 2 Measure distance from ceiling to canopy. Slide the duct cover in place and fasten from inside canopy using the sheet metal screws provided. Installation (VWH 12"H. Wall Hoods w/Recirculating Kit) 1 2 Remove damper and discard with transition. Turn recirculating unit upside down. Place vent hood upside down on recirculating unit. 30 Installation (VWH 10" H./12"H. Wall Hoods w/Recirculating Kit) 3 4 Attach with screws and lock washers provided. 5 Remove electrical box cover. 6 1 Attach with screws. WARNING To reduce the risk of fire, electric shock, or injury to persons, observe the following: • Use this unit only in the manner intended by the manufacturer. If you have any questions, contact the manufacturer. • Before servicing or cleaning unit, switch power off at service panel and lock service panel to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel. 7 5/16" nut driver 2 Flip hood over. Insert 6" of electrical wiring through the top of vent hood and secure. Refer to local codes. CAUTION: Secure vent hood. Make sure mounting screws are secured into framing. Use additional mounting screws and wall anchors, if necessary. 31