Viking VWH Installation Instructions - Page 33

Installation (VWH/CVWH 18"H. Wall & VCWH Chimney Wall Hoods) *For VCWH hoods, begin with Step 3. The VCWH hoods do not require the wood strip 1 1-1/2" x 3/4" (3.8 cm) x ( 1.9 cm) wood strip 1(4-.163c/1m6)" 2 5/16" Nut driver 5/16" Nut driver VWH/CVWH only! Measure down 1-13/16 (4.6 cm) from desired height of hood and secure 1-1/2" x 3/4" wood strip (provided locally) to wall using screws provided. 3 5/16" Nut driver VWH/CVWH only! Use additional mounting screws to secure hood to wood strip. 5/16" Nut Driper CAUTION: Secure vent hood to wall using screws provided. Use additional mounting screws and wall anchors, if necessary. 4 1 CAUTION: If not using a duct cover, using screws provided, make sure top mounting screws are secured into soffit or cabinet framing use additional mounting screws, if necessary. 5 1 1 3 2 Slide filter front over front lip. Push filter rear up, then slide back over rear lip. 33 z 2 Slide filter front over front lip. Push filter rear up, then slide back over rear lip.