Viking VWH Installation Instructions - Page 37

Installation (VCIH/CVCIH Island Hoods) 3 4 5/16" Nut Driver Run duct work down to bottom edge of duct cover/soffit and secure in place. Make sure the duct does not stick down past the cover. 5 Large Center Spacer Grease Trough Center spacer Side spacer Attach canopy to duct cover/soffit. Seal top of hood to duct with aluminum tape. To install ventillation kit refer to ventillation kit installation instructions. •Install larger center spacer in middle of canopy •Slide grease trough down into filter support with lip facing upward •Attach long edge of side spacers to outer side of baffle filters to installed next to canopy. Number of filters will vary due to size. Spacers only go on the (4) filters next to canopy. •Insert small center spacer (36" and 42" models only). •Slide top part of baffle filter up and under large center spacer. •Push bottom of filter up and into grease trough. 37