Viper 5101 Owner Manual - Page 23
Programming - remote programming
View all Viper 5101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
➢ ProgramminAgU X To enter: hold the button for 8 seconds, the transmit LED turns on, the pro- gramming main menu has beenA UaX ccessed. To exit: press and release the button to go back and repeat to exit. The transmit LED turns off when programming is exited. Remote Features menu Press and release the button, 2 LED flashes indicate the remote features menu is accessed. Press the buttons as indicated below,1 flash On, 2 flashes Off: • Autolock feature: PressAUX to turn on/off. • Car 2 feature: Press to turn on/AUoXff. The button has no function. Remote Pairing Remote pairing is a process where the Responder LE remote, and the in-vehicle system learn the other's encrypted identification, securing communication between the two from intruders. How to Remote Pair Make sure the remote control is set for the desired Car 1 or Car 2 operation for the system it is to be paired with. Placing the system into the remote pair mode: 1. Turn the ignition to the On position. 2. Press, release, then press and hold the Control button (on the Control Center). 3. The Control Center LED begins to flash and the horn honks once to confirm the system is in Pair mode, the Control button can be released. The system will stay in Pair mode for 60 seconds or until the ignition is turned off. The horn will emit one short and one long honk when it exits remote pair mode. © 2009 Directed Electronics. All rights reserved. 15