Viper 5101 Owner Manual - Page 35
Programming options
View all Viper 5101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Programming options Your system has many custom programmable options. Some may require installation labor. Ask your authorized dealer for details. The following is a list of the programmable options, with the factory settings in Bold. • Active locking (remote only) and passive locking. The system automatically locks the doors 30-seconds after the last door is closed. Auto Re-lock automatically re-locks the doors 60 seconds after unlocking (if no door is opened). • Locking/Unlocking with horn honk confirmations On or Off. • Ignition controlled door lock feature On or Off: When this feature is programmed on, the doors lock three seconds after the ignition is turned on, and unlock when the ignition is turned Off. The ignition lock and unlock are independent features that can be programmed separately. • Panic mode enabled/disabled when the ignition is turned on or completely turned Off. • Comfort closure is a programming option which closes the vehicle's windows after remote locking. Note: Comfort closure can only be used on cars that have the capability of closing the windows (and on some cars the sunroof as well) with the key cylinder in the door. • Auto re-locking On/Off, ensures the vehicle stays locked if it is not entered after unlocking by remote control. After unlocking by remote, the system automatically re-locks the doors in 30 seconds. Open any point of entry to stop the re-lock until the next unlock by remote. • One-time Bypass On/Off, can be used to temporarily bypass the Passive locking operation for one cycle. It also bypasses the comfort closure and auxiliary channel outputs programmed to activate when locking. After the next unlock all operations return to normal. Turn the ignition On for one to three seconds and then Off. The horn honks once to confirm one-time bypass is enabled. © 2009 Directed Electronics. All rights reserved. 27