Vizio VHT510 VHT510 User Manual - Page 16

VIZIO VHT510 User Manual Dolby and SRS LEDs- LED Color Position 1 Blue Dolby Digital signal is detected Orange DTS signal is detected Off Flashing No Digital Audio input decoding N/A Position 2 SRS TruSurround HD enabled (best for movie/TV content) SRS WOW HD enabled (best for music content). No SRS Processing N/A Position 3 SRS TruVolume Enabled N/A SRS TruVolume Disabled N/A Sound Bar Modes Your VIZIO Sound Bar has two modes: Hub Mode and Client Mode. Use the switch on the back of your Sound Bar to set the mode. See Sound Bar Connections on page 7 to see the location of the switch. Hub Mode If you have only one Sound Bar, set the switch to Hub mode. If the switch is in Client mode, your Sound Bar will not be able to communicate with the subwoofer. Client Mode If you purchase additional products with VIZIO HD Wireless Audio technology in the future, consult those user manuals for the best way to wirelessly connect them to your Sound Bar. Your Sound Bar should only be operated in Client Mode if recommended by the accessories user manual. Hub/Client Mode LEDs-  Lights blue when your Sound Bar is in Client Mode.  Lights orange when your Sound Bar is in Hub Mode.  Flashes slowly when your Sound Bar cannot find a suitable network (as a Client) or is the only device currently in the network (as a Hub).  Flashes quickly when your Sound Bar is pairing. For a Hub device, pairing overrides the link state and your Sound Bar may indicate that is it pairing even if it is already connected with other devices in the network. 16 www.VIZIO.com