Vizio VHT510 VHT510 User Manual - Page 17

VIZIO VHT510 User Manual Chapter 6 Maintenance and Troubleshooting Maintenance Important  Make sure that the power cables are removed from the back of your Sound Bar or Sub-Woofer before cleaning.  Do not use volatile solvent (such as toluene, rosin and alcohol) to clean your Sound Bar or SubWoofer. Such chemicals may damage your Sound Bar or Sub-Woofer housing. Cleaning the Housing and Remote Control  Use a soft cloth for cleaning.  If the housing is seriously contaminated, use a soft cloth moistened with diluted neutral cleaner to clean the display. Wring water out of the cloth before cleaning to prevent water from penetrating into the housing. Wipe the housing with a dry cloth after cleaning. Pairing Your Sound Bar operates in unison with the Wireless Subwoofer and they come paired from the factory. Follow the procedure below if pairing is needed: 1. Connect cables to your Sound Bar (see Connecting Equipment on page 15 for detailed steps). 2. Connect the power adapter to the back of your Sound Bar and the power cord to the back of the subwoofer and then plug them into a wall outlet. 3. Turn on your Sound Bar and subwoofer. 4. Pair and link the subwoofer to your Sound Bar, following the steps in the table below: a. First pair the subwoofer and your Sound Bar. b. Then, link the subwoofer to your Sound Bar (select your Sound Bar as the source of audio). Desired Action Subwoofer Sound Bar Button Action LED Display Subwoofer Action Button Action LED Display Sound Bar Action Pair Wireless Devices Press for more than 5 seconds Starts flashing slowly (after flashing fast) Subwoofer starts pairing mode Press INPUT for more than 3 seconds Link LED flashes fast Sound Bar is in pairing mode Link Subwoofer to Sound Bar Press and hold for 1 to 3 seconds Begins flashing fast Subwoofer selects Sound Bar as audio source N/A N/A N/A Version 5/25/2010 17 www.VIZIO.com