Vizio VHT510 VHT510 User Manual - Page 8

Satellite Speaker Connections, Top Panel Buttons - surround sound

Page 8 highlights

VIZIO VHT510 User Manual Satellite Speaker Connections 1. Threaded insert-Use this to mount the satellite speaker to a wall. 2. Keyhole-Use these to hang the satellite speaker on a wall. 3. CONNECTOR-Connect speaker wire from the subwoofer here (pre-installed at factory). See Connecting speakers to the subwoofer on page 11 for steps to connect your satellite speakers to your subwoofer. Top Panel Buttons Power ( )  Press to turn your Sound Bar on and off.  Press and hold for 3 seconds to put your Sound Bar into standby mode. The indicators turn off. Input   Press repeatedly to step through the input sources in the following sequence: IN (Analog In), Optical In, or iPod, if a VIZIO wireless iPod dock is paired with your Sound Bar. Go to www.vizio.com for more information. Press and hold for 3 seconds to put your Sound Bar into pairing mode. See Pairing on page 17 for more information on pairing. Vol + / - -Press to turn the speaker volume up or down. Remote Control Sensor-The sensor is located to the right of the LED window. Point the remote control directly at this window for the best response to the remote signal. Button Combinations: Some buttons, when pressed in combination with other buttons will perform other procedures.  Volume Up + Volume Down: Press and hold for one second to mute your Sound Bar.  Power + Volume Up + Volume Down: Press and hold for 10 seconds to return your Sound Bar to factory default mode.  Input + Volume Up: Press and hold for five seconds to put your Sound Bar into Rear Mode. Use this mode when the rear left and right satellite speakers are placed behind the listening position. This mode provides the best 5.1 home theater experience and is the default mode of your Sound Bar.  Input + Volume Down: Press and hold for five seconds to put your Sound Bar into Front Mode. Use this mode if you want to put the rear left and right satellite speakers in the front of the room. This mode uses SRS CircleSurround HD technology to provide a virtual 5.1 surround sound experience. Important: DO NOT ATTEMPT to remove the speaker grill as it will void your warranty. 8 www.VIZIO.com

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23

VIZIO VHT510 User Manual
8
www.VIZIO.com
Satellite Speaker Connections
1.
Threaded
insert
—Use this to mount the satellite speaker to
a wall.
2.
Keyhole
—Use these to hang the satellite speaker on a wall.
3.
CONNECTOR
—Connect speaker wire from the subwoofer
here (pre-installed at factory). See
Connecting speakers to
the subwoofer
on page 11 for steps to connect your satellite
speakers to your subwoofer.
Top Panel Buttons
Power (
)
Press to turn your Sound Bar on and off.
Press and hold for 3 seconds to put your
Sound Bar into standby mode. The indicators
turn off.
Input
Press repeatedly to step through the input
sources in the following sequence: IN
(Analog In), Optical In, or iPod, if a VIZIO
wireless iPod dock is paired with your Sound
Bar. Go to
www.vizio.com
for more information.
Press and hold for 3 seconds to put your Sound Bar into pairing mode. See
Pairing
on page 17
for more information on pairing.
Vol + / -
Press to turn the speaker volume up or down.
Remote Control Sensor—
The sensor is located to the right of the LED window. Point the remote control
directly at this window for the best response to the remote signal.
Button Combinations:
Some buttons, when pressed in combination with other buttons will perform other
procedures.
Volume Up + Volume Down:
Press and hold for one second to mute your Sound Bar.
Power + Volume Up + Volume Down:
Press and hold for 10 seconds to return your Sound Bar
to factory default mode.
Input + Volume Up:
Press and hold for five seconds to put your Sound Bar into Rear Mode. Use
this mode when the rear left and right satellite speakers are placed behind the listening position.
This mode provides the best 5.1 home theater experience and is the default mode of your Sound
Bar.
Input + Volume Down:
Press and hold for five seconds to put your Sound Bar into Front Mode.
Use this mode if you want to put the rear left and right satellite speakers in the front of the room.
This mode uses SRS CircleSurround HD technology to provide a virtual 5.1 surround sound
experience.
Important:
DO NOT ATTEMPT to remove the speaker grill as it will void your warranty.