Vizio XMA1200 Quick Installation Guide

Vizio XMA1200 Manual

Get Vizio XMA1200 PDF manuals and user guides View all Vizio XMA1200 manuals
Add to My Manuals
Save this manual to your list of manuals

Vizio XMA1200 manual content summary:

  • Vizio XMA1200 | Quick Installation Guide - Page 1
    FULL ARTICULATING MOUNT UNIVERSAL FOR 40" - 60" TVS UP TO 120 LBS XMA1200 - QUICK INSTALL GUIDE
  • Vizio XMA1200 | Quick Installation Guide - Page 2
    have any doubts about the ability of the wall to support the mounting system or your TV, do not install the mounting system. Contact a qualified contractor. Only attach this mount system to vertical walls as instructed in this Quick Install Guide. This mounting system is for indoor use only. Keep
  • Vizio XMA1200 | Quick Installation Guide - Page 3
    . Do not begin the installation unless you have all of the following items. Mounting a TV requires power tools. If you are unfamiliar with safe power tool use, consult a professional installer. Mounting a TV requires lifting. To make the installation easier and safer, have someone help you. Always
  • Vizio XMA1200 | Quick Installation Guide - Page 4
    2 - REVIEW THE PACKAGE CONTENTS Before you begin, ensure all parts are included and undamaged. To prevent loss, do not unpack the small parts until they are required. If any parts are missing or damaged, contact VIZIO Customer Service (877) 698-4946. x 2 Quick Install Guide & Wall-Mount Template
  • Vizio XMA1200 | Quick Installation Guide - Page 5
    M4 x 4 x 4 x 4 M5 x 4 x 4 x 4 x 4 x 4 M6 x 4 x 4 x 4 x 4 M8 x 4 x 4 x 4 MISC LAG x 6 x 6 ANCHOR x 4 x 4 x 6 3
  • Vizio XMA1200 | Quick Installation Guide - Page 6
    CHOOSE THE DIRECTION OF SWING ARM The mount features an arm designed to swing away from the wall like a door. Like a door, the mount can swing open to the left or right. If you want the arm to swing to the left, do nothing. The mount is ready to swing to the left as it is assembled in the box. Go
  • Vizio XMA1200 | Quick Installation Guide - Page 7
    on the floor. Using the screwdriver, remove the 2 philips-head screws as shown. 2 1 2. Hold down the mount as shown and swing the arm away from the mount. Swing Arm Away 1 2 Hold Down 3. Using the screwdriver, remove the remaining 4 phillips-head screws from the arm. There are 2 screws inside
  • Vizio XMA1200 | Quick Installation Guide - Page 8
    the arm over, then gently reattach the arm to the mount. 6. Using the phillips-head screwdriver, replace the 6 phillips-head screws. Note that the tab should be on the top of the arm. The arm is
  • Vizio XMA1200 | Quick Installation Guide - Page 9
    LENGTH OF SWING ARM If you are mounting a 40 - 52" TV, you can adjust the swing arm so that more of the mount is hidden behind the TV screen. 40 - 48" To adjust the length of the swing arm: 1. Find the size of your TV (reference your TV's User Guide). Locate the 9 holes on the top of
  • Vizio XMA1200 | Quick Installation Guide - Page 10
    40 - 48" use the innermost holes. • For TVs 50 - 52" use the middle holes. • For TVs 55 - 60" use the outermost holes. 4. Using the phillips-head screwdriver, replace the 4 screws. The swing arm is adjusted. • If you are installing the mount on a wall with wood studs, go to Step 5A on page 9. • If
  • Vizio XMA1200 | Quick Installation Guide - Page 11
    mount: 1. Use the electronic stud finder to locate two studs in the wall. 16" The studs should be approximately 16" apart. Use the pencil to mark the areas of the wall where the studs are located. 2. Hold the template against the wall, using the pencil marks as a guide. Ensure 4
  • Vizio XMA1200 | Quick Installation Guide - Page 12
    the power drill and the 7/32" drill bit, drill into the top two template holes. Drill about 2" into the studs. Remove the template from the wall. 4. Remove 2 lag bolts and 2 washers from the pouch labeled LAG. Use a wrench to insert the lag bolts and washers into the holes you just drilled
  • Vizio XMA1200 | Quick Installation Guide - Page 13
    5. Remove the plastic covers from the mount. Use the thumb holes 5 to lift the covers away from the mount. Save the plastic covers. They will be reattached in Step 7. Use the Thumb Hole 6. Hang the mount on the wall using the 2 lag bolts, then slide the mount so the lag bolts are resting in the
  • Vizio XMA1200 | Quick Installation Guide - Page 14
    stud. Using the power drill and the 7/32" drill bit, drill 2 holes in the bottom two mount holes. Drill about 2" into the studs. 1 2 8. Remove 2 lag bolts and 2 washers from holes you just drilled. Insert the lag bolts completely. The mount is attached to the wall. Go to Step 6 on page 16. 12
  • Vizio XMA1200 | Quick Installation Guide - Page 15
    STEP 5B - MOUNTING TO A CONCRETE WALL 1. Hold the template against the wall, using the level to level the template. Level 1 When the template is level, tape of the template holes as shown. Drill about 2 1/2" deep. Remove the template from the wall. 3 (choose one) 21 2 4 (choose one) 56 13
  • Vizio XMA1200 | Quick Installation Guide - Page 16
    from the pouch labeled ANCHOR. 3 Push the anchors into the holes you just drilled. Ensure the anchors are completely inserted and flush with the wall. 4. Remove 6 lag bolts and 6 washers from the pouch labeled LAG. 4 Use a wrench to tighten the lag bolts and washers into the anchors. Do not
  • Vizio XMA1200 | Quick Installation Guide - Page 17
    in Step 7. 6. Hang the mount on the wall using the 6 lag bolts, then slide the mount so the lag bolts are resting in the narrow part of the slot. Verify that the mount is level. Make small adjustments before tightening all 6 lag bolts. The mount is attached to the wall. Go to Step 6 on page
  • Vizio XMA1200 | Quick Installation Guide - Page 18
    beneath the screen to prevent scratches. In your TV's User Guide, find the size of your TV's mounting holes. These will be listed as M4, M5, M6, or M8. Open the pouch labeled with the size that matches your TV's mounting holes. If you do not have the User Guide, or the size is not listed, you
  • Vizio XMA1200 | Quick Installation Guide - Page 19
    3. Using the screwdriver, insert the screws, star washers, and 3 washers as shown. Because each TV is different, your VIZIO TV mount includes screws of different lengths. Use screws that can be inserted completely. Do not use a short screw if a longer screw can be inserted completely. If
  • Vizio XMA1200 | Quick Installation Guide - Page 20
    brackets as 4 shown. Open the pouch labeled Sec X1 and remove 4 nuts and their 4 matching screws. x 4 x 4 5. Insert the screws through both the horizontal and vertical TV 5 brackets. Ensure you attach both the top and bottom horizontal brackets. The
  • Vizio XMA1200 | Quick Installation Guide - Page 21
    of another person. 1. Swing the arm away from the mount. 1 Swing Arm Away 2. With the help of another person, lift the TV and hang it on the mount arm as shown. First, hang the top bracket on the arm. The tab on the mount arm fits into the slot on the horizontal bracket. Then
  • Vizio XMA1200 | Quick Installation Guide - Page 22
    Sec X1. Using the locking tool, insert and tighten the 2 security screws as shown. Locking Tool 4. Place the locking tool inside one of the mount brackets, then 4 snap the plastic covers back into place. By saving the locking tool in this place, you can remove the security screws later. The
  • Vizio XMA1200 | Quick Installation Guide - Page 23
    STEP 6 - FINAL ADJUSTMENTS Using the included zip-ties, you can bundle and hide your TV's cables. 1. To bundle and hide your TV's cables, take the 4 zip-ties and 4 sticky mounts from the pouch labeled Sec X1. 1 2 Bundle the cables together and wrap them with zip-ties. Before closing the zip-ties
  • Vizio XMA1200 | Quick Installation Guide - Page 24
    If necessary, you can adjust both the swivel and tilt of the TV. 1 Remove the allen wrench from the pouch labeled Sec X1. 1. Using the allen wrench, adjust the swivel tension by adjusting the top and bottom screws
  • Vizio XMA1200 | Quick Installation Guide - Page 25
    shipping material or packaging that affords an equal degree of protection. VIZIO Technical Support will provide instructions for packing and shipping the covered Product to the VIZIO service center. Limitations and Exclusions VIZIO's one-year limited warranty only covers defects in materials and
  • Vizio XMA1200 | Quick Installation Guide - Page 26
    Department at the number below. NOTES Customer support and quality service are integral parts of VIZIO's commitment to service excellence. For technical assistance contact our VIZIO Technical Support Department via email or phone. Please have your VIZIO model number, serial number, and date of
  • Vizio XMA1200 | Quick Installation Guide - Page 27
  • Vizio XMA1200 | Quick Installation Guide - Page 28
    SHOWN ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. IMAGES USED ARE FOR ILLUSTRATION PURPOSES ONLY. VIZIO, THE V LOGO, WHERE VISION MEETS VALUE, AND OTHER VIZIO TRADEMARKS ARE THE INTELLECTUAL PROPERTY OF VIZIO INC. PRODUCT FEATURES AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. © 2010
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
XMA1200
- QUICK INSTALL GUIDE
FULL ARTICULATING MOUNT
UNIVERSAL FOR 40” - 60” TVS UP TO 120 LBS