Vizio XMA1200 Quick Installation Guide - Page 14
Drill about 2 into the studs.
View all Vizio XMA1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
7. Ensure the mount is level. Make any necessary adjustments, then 7 use a wrench to tighten the top 2 lag bolts. Ensure the bottom mount holes are over a stud. Using the power drill and the 7/32" drill bit, drill 2 holes in the bottom two mount holes. Drill about 2" into the studs. 1 2 8. Remove 2 lag bolts and 2 washers from the pouch labeled LAG. 8 Use a wrench to tighten the lag bolts and washers into the 2 holes you just drilled. Insert the lag bolts completely. The mount is attached to the wall. Go to Step 6 on page 16. 12
7. Ensure the mount is level. Make any necessary adjustments, then
use a wrench to tighten the top 2 lag bolts.
Ensure the bottom mount holes are over a stud. Using the power
drill and the 7/32” drill bit, drill 2 holes in the bottom two mount
holes.
Drill about 2” into the studs.
8. Remove
2 lag bolts
and
2 washers
from the pouch labeled
LAG
.
Use a wrench to tighten the lag bolts and washers into the 2
holes you just drilled. Insert the lag bolts completely.
The mount is attached to the wall.
Go to Step 6 on page 16.
7
8
1
2
12