Vtech 1739 User Manual - Page 10

Remote operation Access the answering system remotely You can access many features remotely from a touch-tone telephone. 1. Dial your telephone number. 2. When the system answers, enter your 3-digit remote access code during or after the announcement. The system announces the number of messages, then begins playing back the messages. If the announcement continues to play after you have entered your remote access code, wait for the announcement to end, then enter the code again. 3. To use remote access commands (see below), press 5 during message playback and wait for the two-beep signal. 4. Enter a remote access command. Feature summary FUNCTION: Voice help menu Play all messages Play new messages Repeat a message Stop new playback Skip a message Save message Delete message Delete all messages Record announcement Review announcement Record memo Review the clock Set the clock Turn system off Turn system on Review settings COMMAND: Press 5. After the 2 beeps, wait 4 seconds for the system to automatically play back all messages, or press 1. Press 2. Press 4 while the message is playing. Press 5 while the message is playing. Press 6 while the message is playing. Hang up. Press 3 while the message is playing. After listening to all messages and the system has beeped twice, press 3 twice. Press 7, after the beep. Record the announcement, and press 5 to stop. The system will then play back the announcement. Press 7. Press #, and speak after the beep. Press 5 to exit. Press 8. Press 8. Follow the prompts to set day, time and year. Press 0. When the system is off, it answers after 10 rings, and announces "The machine is off." The system beeps twice. You can leave a message by pressing #, hang up to exit, or turn the system on as follows: • Press 0, the system announces "The machine is on, XX minutes to record," then beeps twice. The system is now turned on. Press 9.