Vtech 1739 User Manual - Page 3

Feature setup Feature setup 1. To enter the feature setup mode, press and hold SETUP until the system announces "Language is..." 2. Press SETUP repeatedly until you hear the desired feature. 3. When you hear the feature you want to modify, press ANNC/SKIP or MEMO/REPEAT to choose the feature's setting. 4. Press SETUP to save the setting and advance to the next setting. - OR Press PLAY/STOP save the setting and exit feature setup. When any feature is on, the message window displays - . When any feature is off, the message window displays . - Feature summary FEATURE SYSTEM ANNOUNCEMENT OPTIONS Language "Language is..." • You may choose English or Español (Spanish) for the voice prompts used by the system. • During setup, the message window displays the current language setting (E for English or S for Spanish). Ring select "Number of rings is..." • Choose the number of rings before the system answers a call. You can set it between 2 and 7 rings, toll saver 2/4 or toll saver 4/6. • When the toll saver is set as 2/4, the system answers after 4 rings if there are no new messages, or after 2 rings if there are new messages. When the toll saver is set as 4/6, the system answers after 6 rings if there are no new messages, or after 4 rings if there are new messages. • During setup, the message window displays the number of rings (or 8 for toll saver 2/4, 9 for toll saver 4/6). Remote access code "Remote access code is..." • Change the remote access code to any 3-digit number between 500 and 999. • The remote access code is preset to 500. You can access many features remotely from a touch-tone telephone. • The 3 digits of the remote access code are set separately. The system will prompt you to set the second and third digits after setting the first digit. See Feature setup above.