Vtech 5105 User Manual - Page 9
Charging Of Handset Battery Pack, IMPORTANT, Connecting to phone line, Checking for dial tone - phones
View all Vtech 5105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Getting Started Charging Of Handset Battery Pack The Handset of your v 2656 cordless telephone is powered by a rechargeable battery pack. It charges automatically whenever the Handset is in the Base Unit. Maximum talk time on a full charge is 7.5 hours. Maximum standby time is 5 days. You should charge the battery pack for 12 hours when you first receive your phone. You'll know the battery pack needs charging when: • The low battery message is displayed: • The handset seems completely dead, the LCD is completely clear and does not activate when you press the keys. IMPORTANT: 1. Do not dispose of a battery pack in a fire, the cell may explode. 2. Do not open or mutilate the battery pack. Toxic substances may be released, causing harm to eyes or skin. 3. Exercise care in handling battery packs in order to prevent an accidental short of the charge contacts, potentially causing the battery pack to overheat. 4. Do not dispose of this battery pack into household garbage. Please refer to the following information concerning proper battery recycling. Connecting to phone line Plug one end of the telephone line cord into the jack on the bottom of the Base unit. Plug the other end of this cord into the wall jack. Checking for dial tone After the battery is charged press ON on the Handset. The Phone icon will appear on the Handset display, and you will hear dial tone. If not, see In Case of Difficulty. 9 91-005358-050-000 v2656.pmd 9 8/5/2004, 4:51 PM