Vtech DS6321-3 User Manual (DS6321-3 User Manual) - Page 21
Pair a headset continued, Auto connection
UPC - 735078017659
View all Vtech DS6321-3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Bluetooth Pair a headset (continued) 9. When the handset displays Headset A paired to base. Connect now? Press SELECT, then press MENU/SELECT on the handset. • When you already have two devices on the active Headset A paired to base. Connect now? devices list, the handset shows Maximum of 2 devices can be connected. You are prompted to Press SELECT replace an existing device on the active devices list (page 21). • When you already have one headset on the active devices list, the handset shows Only 1 headset can be connected. You are prompted to replace an existing device on the active devices list (page 21). Headset setup 10. When a device is successfully connected, the completed handset displays Headset setup completed Device connected and the corresponding status icon ( 1 or 2). The corresponding light on the telephone base Device connected (DEVICE1 or DEVICE2) turns on. • The pairing process may take up to one minute. If the pairing process fails, try again. • If you put the handset back in the telephone base or charger while pairing, the process discontinues and the handset returns to idle mode. Auto connection When a device is successfully paired with the telephone base but not connected, the handset displays Headset setup completed Device not connected and then Auto-connect function enabled Press SELECT. You can press MENU/SELECT to exit. You can connect a device manually (page 20). Headset setup completed Device not connected Auto-connect function enabled Press SELECT 17