Weider 160 English Manual - Page 6

3. Attach the Storage Tube (51) to the Right Base (7) with two M8 x 35mm Carriage Bolts (36) and 3 two M8 Nylon Locknuts (43). Press a 45mm x 38mm Bushing (23) onto the Left Upright (4). Slide a Weight Rest (6) into the Upright and secure it at the desired height with a 54mm Adjustment Knob (27). Secure the other Weight Rest (6) to the Right Upright (5) in the same manner. Be sure that both Weight Rests are set at the same height. 6 6 27 23 51 23 43 5 43 27 4 36 7 4. Press two 38mm Square Inner Caps (32) into the ends of the Leg Lever (9). Press two 25mm Round Inner Caps (21) into the ends of the weight tube. Insert four 19mm Round Inner Caps (47) into the ends of two Pad Tubes (48). Slide the Pad Tubes into the holes at the ends of the Leg Lever (9). Slide four Foam Pads (33) onto the ends of the Pad Tubes. 5. Lubricate the M10 x 67mm Bolt (46). Attach the Leg Lever (9) to the Front Leg (2) using the Bolt and an M10 Nylon Locknut (45). Do not overtighten the Nylon Locknut; the Leg Lever must be able to pivot easily. Press two 19mm Round Inner Caps (47) into the ends of a Pad Tube (48). Slide the Pad Tube through the hole in the Front Leg (2). Slide a Foam Pad (33) onto each end of the Pad Tube. 4 33 9 32 21 33 21 47 48 47 33 Weight Tube 32 47 48 47 33 5 47 33 48 45 9 2 46 47 Lubricate 33 6