Weider Club 16.4st English Manual - Page 12
Cable Assembly
View all Weider Club 16.4st manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
18. Wrap the High Cable (58) around a ÒVÓ-Pulley 18 (50). Attach the ÒVÓ-Pulley and a Long Cable Trap (31) to the indicated bracket on the Front Upright (42) with a 3/8Ó x 2 1/2Ó Bolt (86) and a 3/8Ó Nylon Locknut (21). Be sure that the Long Cable Trap is positioned to hold the Cable in place. 19. Route the High Cable (58) around the ÒVÓPulley (50) on the Left Arm (47). Be sure that 19 the Cable is in the groove of the Pulley and that the Long Cable Trap (31) is posi- tioned to hold the Cable in place. Tighten the 3/8Ó x 2 1/2Ó Bolt (86) and the 3/8Ó Nylon Locknut (not shown). 86 31 58 50 21 42 86 31 50 Bracket 58 47 20. Route the High Cable (58) around the ÒVÓ- 20 Pulley (50) on the Right Arm (48). Be sure that the Cable is in the groove of the ÒVÓ- Pulley and that the Long Cable Trap (31) is turned to hold the Cable in place. Tighten the 3/8Ó x 2 1/2Ó Bolt (86) and the 3/8Ó Nylon Locknut (not shown). 58 31 86 50 48 CABLE ASSEMBLY 21. Attach the Pulley Bracket (20) to the Top 21 Frame (55) with the 5/16Ó x 5Ó Bolt (68) and a 68 5/16Ó Nylon Locknut (3). Do not over tighten the Nylon Locknut; the Pulley Bracket must be able to move freely. See the inset drawing. Route the High Cable 55 66 (58) around the 3 1/2Ó Pulley (15) attached to the Pulley Bracket (20). Tighten the 3/8Ó x 2Ó 20 12 Bolt (12) and a 3/8Ó Nylon Locknut (not shown). Be sure that the Cable is in the groove of the Pulley and that the Cable 3 15 58 Trap (66) is turned to hold the Cable in place. 12