Weider Club 16.4st English Manual - Page 14
Pulley 15. Attach Pulley and a Cable Trap
View all Weider Club 16.4st manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
CABLE ASSEMBLY 25. Locate the Low Cable (23) and the bag labeled ÒLOW PULLEY.Ó Route the Low Cable under the 3 1/2Ó Low Pulley (76). Attach the Pulley and the 5/8Ó x 9/16Ó Spacer (7) to the Press Frame (17) with a 3/8Ó x 3 3/4Ó Bolt (88), 3/8Ó Flat Washer (9), and a 3/8Ó Nylon Locknut (21). Be sure that the parts are oriented as shown in the drawing, and that the end of the Cable with the ball is on the indicated side of the Press Frame between the Pulley and the crossbar. 25 23 Crossbar 88 9 7 76 Ball 17 76 21 17 26. Route the Low Cable (23) around a 3 1/2Ó 26 Pulley (15). Attach Pulley and a Cable Trap (66) to the lower hole in the Front Upright (42) with a 3/8Ó x 3 3/4Ó Bolt (88), a 3/8Ó Flat Washer (9), and a 3/8Ó Nylon Locknut (21). See the inset drawing. Be sure that the Cable Trap is turned to hold the Cable in place and that the Cable is routed around the Pulley as shown. 88 9 42 66 21 15 23 23 15 21 66 42 Inset shows view from other side 27. Route the Low Cable (23) around a 3 1/2Ó Pulley (15). Attach the Pulley and a Cable 27 Trap (66) to the upper hole in the Press Frame (17) with a 3/8Ó x 3 1/2Ó Bolt (16), a 3/8Ó Flat Washer (9), and a 3/8Ó Nylon Locknut (21). Be sure that the Cable Trap is turned to hold the Cable in place and that the Cable is routed around the Pulley as shown. 21 66 23 9 16 15 17 28. Route the Low Cable (23) around another 3 28 1/2Ó Pulley (15). Attach the Pulley and a Cable Trap (66) to the upper hole in the Front Upright (42) with a 3/8Ó x 3 3/4Ó Bolt (88), a 3/8Ó Flat Washer (9), and a 3/8Ó Nylon Locknut (21). See the inset drawing. Be sure that the Cable Trap is turned to hold the Cable in place and that the Cable is routed around the Pulley as shown. 42 23 66 21 15 23 15 88 66 42 Inset shows view from other side 88 9 14