Weider Precision 200 English Manual - Page 5
Assembly
View all Weider Precision 200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
ASSEMBLY For your convenience, the weight system is shipped almost fully assembled. Before completing assembly, carefully read the following information and instructions. • Because of its size and weight, the weight system should be assembled in the location where it will be used. Make sure that there is enough clearance to walk around the weight system. • To hire an authorized service technician to assemble the weight system in your home, call 1-800-445-2480. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. • Assembly requires the assistance of a second person. • Assembly requires the included hex keys and grease and your own Phillips screwdriver. 1. With the help of another person, stand the 1 weight system in the vertical position. Have the other person hold the weight system securely until assembly step 1 is completed. See the upper drawing. Pivot the two Front Stabilizers (3) to the positions shown. Secure 3 each Front Stabilizer to the Frame (1) with an M12 x 30mm Screw (72). See the lower drawing. Orient the Rear Stabilizer (2) as shown. Attach the Rear Stabilizer to the Frame (1) with an M12 x 60mm Screw (77) and an M12 Washer (83). 1 72 3 1 5 77 83 2