Weider Precision 200 English Manual - Page 9
Attaching Accessories To The Low
View all Weider Precision 200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
ATTACHING ACCESSORIES TO THE LOW PULLEY STATION To use accessories with the low pulley station, first remove the seat (see ATTACHING THE SEAT below). Attach the Lat Bar (42) to the Low Cable (31) at the low pulley station with a Cable Clip (43). For some exercises, attach a Chain (44) between the Lat Bar and the Cable with two Cable Clips. Adjust the length of the Chain between the Lat Bar and the Cable so that the Lat Bar is in the correct starting position for the exercise to be performed. Attach the Handle Strap (91) to the Low Cable (31) in the same way. ATTACHING THE SEAT To use the Seat (22), slide the Seat Frame (4) onto a set of pegs on the Frame (1). When the Seat (22) is not in use, set the Seat Frame (4) away from the weight system. 91 42 31 43 43 44 22 4 1 USING THE PRESS ARMS To use the Press Arms (7, 8) pull them away from the Press Arm Magnets (39) and lower them. When the Press Arms (7, 8) are not in use, raise them until the Press Arm Magnets (39) hold them securely. 39 7 9 39 8