Weider Pro 256 Bench User Manual - Page 7

Attach the Leg Lever 4 to the Front Leg 8

Get Weider Pro 256 Bench PDF manuals and user guides View all Weider Pro 256 Bench manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

3. Attach the Front Leg (8) to the Frame (2) with two M8 x 43mm Bolts (39), four M8 Washers (16), and two M8 Locknuts (17); do not tighten the Locknuts yet. 3 39 8 2 16 16 16 17 4. Attach the Frame (2) to the Crossbar (3) with three 4 M8 x 55mm Bolts (18), two M8 Washers (16), and three M8 Locknuts (17); do not tighten the Locknuts yet. 18 16 17 2 3 18 17 5. Apply some of the included grease to an M10 x 5 63mm Bolt (32). Attach the Leg Lever (4) to the Front Leg (8) with the M10 x 63mm Bolt (32) and an M10 Locknut (33). Do not overtighten the Locknut; the Leg Lever must pivot easily. 32 Grease 4 33 8 6. Insert a Long Pad Tube (10) into a hole in the Leg Lever (4). Slide two Foam Pads (23) onto the Long Pad Tube. Attach the other Long Pad Tube (10) and two Foam Pads (23) in the same way. 6 23 4 10 23 23 7 10 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
3.
Attach the Front Leg (8) to the Frame (2) with two
M8 x 43mm Bolts (39), four M8 Washers (16),
and two M8 Locknuts (17);
do not tighten the
Locknuts yet.
4.
Attach the Frame (2) to the Crossbar (3) with three
M8 x 55mm Bolts (18), two M8 Washers (16), and
three M8 Locknuts (17);
do not tighten the
Locknuts yet.
5.
Apply some of the included grease to an M10 x
63mm Bolt (32).
Attach the Leg Lever (4) to the Front Leg (8) with
the M10 x 63mm Bolt (32) and an M10 Locknut
(33).
Do not overtighten the Locknut; the Leg
Lever must pivot easily.
3
17
2
39
16
16
8
16
4
2
3
17
17
18
18
16
5
33
4
Grease
32
8
7
6.
Insert a Long Pad Tube (10) into a hole in the
Leg Lever (4). Slide two Foam Pads (23) onto the
Long Pad Tube.
Attach the other Long Pad Tube (10) and two
Foam Pads (23) in the same way.
10
10
4
23
23
23
23
6