Weider Pro 260 English Manual - Page 6
Tighten the M10 Nylon Locknuts 43 used - weight bench and weights
View all Weider Pro 260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
2. Attach the Bench Frame (1) to the Front Leg (2) 2 with two M10 x 65mm Bolts (40), two M10 Washers (44), and two M10 Nylon Locknuts (43). Do not tighten the Locknuts. 40 1 44 43 40 2 3. Attach the Bench Frame (1) to the Crossbar (4) 3 with two M10 x 81mm Bolts (41) and two M10 Nylon Locknuts (43). Tighten the M10 Nylon Locknuts (43) used in steps 1 through 3. 4 43 41 41 1 4. Attach the Weight Tube (16) inside the Leg Lever 4 (3) with an M8 x 58mm Bolt (52), two M8 Washers (56), a 10mm Spacer (32), and an M8 Nylon Locknut (55). Press the 25mm Round Angled Cap (28) onto the Weight Tube (16). Grease an M10 x 68mm Bolt (54). Attach the Leg Lever (3) with the Bolt and an M10 Nylon Locknut (43). Do not overtighten the Locknut; the Leg Lever must be able to pivot easily. 5. Orient the Backrest Frames (12) with the indicat- 5 ed holes closer to the bottom. Attach the Backrest Frames to the Backrest Bracket (10) with four M6 x 40mm Bolts (49), four M6 Washers (48), and four M6 Nylon Locknuts (51). Do not tighten the Locknuts. 43 2 3 55 32 28 56 56 16 52 Grease 54 49 48 Holes 48 12 51 10 48 48 49 51 6