Weider Pro 260 English Manual - Page 7
Attach the Adjustment Pin 25 to the Bench
View all Weider Pro 260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
6. Orient the Backrest (13) as shown. Attach the 6 Backrest to the Backrest Frames (12) with four M6 x 40mm Bolts (49) and four M6 Washers (48). Do not tighten the Bolts. 13 Wide End 12 12 48 48 48 49 7. Insert the Backrest Bracket (10) through the Bench Frame (1). Grease an M10 x 168mm Bolt (50). Attach the Backrest Frames (12) to the Bench Frame (1) with the Bolt and an M10 Nylon Locknut (43). Do not overtighten the Locknut; the Backrest Frames must be able to pivot easily. Attach the Adjustment Pin (25) to the Bench Frame (1) with an M4 x 16mm Screw (45). Engage the Pin into the Bench Frame and the Backrest Bracket (10). Tighten the M6 x 40mm Bolts (49) and M6 Nylon Locknuts (51) used in steps 5 and 6. 49 7 12 10 43 1 25 50 45 8. Orient the Seat (14) as shown. Attach the Seat to the Bench Frame (1) with four M6 x 16mm 8 Screws (39). 14 Wide End 1 39 7