Weider Pro 325 Bench English Manual - Page 16

PART IDENTIFICATION CHART Refer to the drawings below to identify small parts used in assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST in the center of this manual. Note: Some small parts may have been pre-attached. If a part is not in the parts bag, check to see if it has been preattached. M10 x 180mm Bolt (35) M10 Washer (6) M8 Washer (41) M6 Washer (36) M10 Nylon Locknut (11) M8 Nylon Locknut (73) M6 Nylon Locknut (40) M4 x 16mm Screw (71) M10 x 86mm Bolt (59) M6 x 16mm Screw (30) M10 x 78mm Bolt (67) M10 x 22mm Bolt (60) M6 x 38mm Screw (37) M10 x 47mm Bolt (24) M10 x 75mm Bolt (66) M10 x 72mm Bolt (70) M10 x 68mm Bolt (31) M8 x 58mm Bolt (38) M10 x 58mm Carriage Bolt (32)