Weider Pro 340 English Manual - Page 9
overtighten
View all Weider Pro 340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
7. Attach the Backrest (23) to the Backrest Tubes (13) 7 with four M6 x 40mm Bolts (44) and four M6 23 Washers (54). The Backrest Tubes must be ori- ented as shown. 13 ' 4-fr-54 8. Lubricate an M10 x 165mm Bolt (43). Attach the Backrest Tubes (13) to the Bench Frame (5) with the Bolt, two M10 Washers (51), and-an M10 Nylon Locknut (49). The Backrest Tubes must be oriented as shown. Do not overtighten the Nylon Locknut; the Backrest Brackets must be able to move freely. Lower the Backrest (23) onto the Adjustment Tube (12). 9. Attach the Seat (22) to the Bench Frame (5) with the M6 x 65mm Bolt (46), two M6 x 16mm Screws (45), and three M6 Washers (54). 54 44 44 8 0 23 Lubricate 43 13 51 . • ► - 49 5 9 22 .. 12 10. Attach the Weight Tube (19) to the Leg Lever (3) with an M8 x 65mm Bolt (42), two M8 Washers (55), a 13mm Spacer (56), and an M8 Nylon Locknut (40). Press the 1" Round Angle Cap (57) onto the Weight Tube (19). Slide the Weight Stop (21) onto the Weight Tube (19). 54 5 * 45 • 0 0 . ' t 45-A 54 46 10 21 - 0 0 42 55 19 3 57 - 0 'Gt 55 (a , 56 40 9