Weider Pro 900 Bench English Manual - Page 8

Attach the Curl Pad 28 to the Curl Post 27

Get Weider Pro 900 Bench PDF manuals and user guides View all Weider Pro 900 Bench manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

7. Press four 1Ó Square Inner Caps (12) into the indicated ends of the Backrest Tubes (5, 55). Press two 1Ó x 2Ó Inner Caps (45) into the ends of the adjustment tubes. With the wide end of the Backrest (6) positioned as shown, attach the Backrest Tubes (5, 55) to the Backrest (6) with four M6 x 38mm Screws (16) and four M6 Washers (25). The Backrest Tubes and the Backrest must be oriented exactly as shown. 8. Lubricate the M10 x 178mm Bolt (17). Attach the Backrest Tubes (5, 55) to the Frame (2) with the Bolt, two M10 Washers (24), and an M10 Nylon Locknut (19). Secure the Backrest (6) at the desired height by inserting the Adjustment Pin (40) through the adjustment tubes and the Frame (2). Attach the Pin Clip (57) to the end of the Adjustment Pin. Make sure that the Adjustment Pin (40) is completely inserted through both adjustment tubes. 9. With the wide end of the Seat (11) positioned as shown, attach the Seat to the brackets on the Frame (2) with four M6 x 16mm Screws (15). 7 6 Wide End 12 5 12 8 25 16 45 6 5 55 40 17ÑLubricate 24 25 55 16 Adjustment Tubes 25 16 Adjustment Tubes 2 19 57 9 11 Wide End 2 15 10. Attach the Curl Pad (28) to the Curl Post (27) with two M6 x 16mm Screws (15). 10 28 15 27 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
8
7.
Press four 1± Square Inner Caps (12) into the
indicated ends of the Backrest Tubes (5, 55).
Press two 1± x 2± Inner Caps (45) into the ends of
the adjustment tubes.
With the wide end of the Backrest (6) positioned
as shown, attach the Backrest Tubes (5, 55) to
the Backrest (6) with four M6 x 38mm Screws
(16) and four M6 Washers (25).
The Backrest
Tubes and the Backrest must be oriented
exactly as shown.
8.
Lubricate the M10 x 178mm Bolt (17). Attach the
Backrest Tubes (5, 55) to the Frame (2) with the
Bolt, two M10 Washers (24), and an M10 Nylon
Locknut (19).
Secure the Backrest (6) at the desired height by
inserting the Adjustment Pin (40) through the
adjustment tubes and the Frame (2). Attach the
Pin Clip (57) to the end of the Adjustment Pin.
Make sure that the Adjustment Pin (40) is
completely inserted through both adjustment
tubes.
9.
With the wide end of the Seat (11) positioned as
shown, attach the Seat to the brackets on the
Frame (2) with four M6 x 16mm Screws (15).
16
25
55
5
12
12
16
45
6
Wide
End
7
2
57
40
Adjustment
Tubes
5
6
55
8
2
11
Wide
End
15
28
27
15
9
10
10.
Attach the Curl Pad (28) to the Curl Post (27) with
two M6 x 16mm Screws (15).
25
Adjustment
Tubes
17°Lubricate
24
19
25
16