Weider Pro 9000 Instruction Manual - Page 13

51mm x 76mm Outer Cap (79) 19mm Round Inner Cap (81) 25mm Round Inner Cap (45) 25mm x 50mm Inner Cap (82) 50mm Square Inner Cap (43) 13mm x 12mm Spacer (38) 15mm x 8mm Spacer (55) 13mm x 10mm Spacer (75) 15mm x 13mm Spacer (39) 45mm Square Inner Cap (42) 15mm x 10mm Spacer (40) 1" Retainer (35) M10 x 180mm Bolt (78) PART IDENTIFICATION CHART Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is the key number of the part, from the PART LIST in the centre of this manual. Note: Some small parts may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached. M8 Nylon Locknut (48) M10 Nylon Locknut (49) M6 Washer (59) M10 Washer (52) M8 Washer (53) M6 x 16mm Bolt (80) M10 x 19mm Bolt (61) M8 x 22mm Shoulder Bolt (60) M6 x 63mm Bolt (56) M8 x 58mm Bolt (41) M8 x 70mm Bolt (58) M10 x 68mm Bolt (46) M10 x 65mm Bolt (54) M10 x 60mm Carriage Bolt (50) M8 x 65mm Bolt (51) M10 x 60mm Bolt (47) M10 x 45mm Bolt (57)