Weslo Body Shop 2 English Manual - Page 13

ATTACHING/DETACHING THE SEAT For some exercises, the Seat (63) must be removed from the cross training system. To remove the Seat, first disconnect the low cable from the leg lever (see CONNECTING THE LEG LEVER TO THE LOW CABLE below). Lift the Seat Frame (65) out of the seat tube on the Upright (67). To attach the Seat (63), insert the Seat Frame (65) into the seat tube. CONNECTING THE LEG LEVER TO THE LOW CABLE To use the Leg Lever (66), attach the low cable to the 5/16" Eye Bolt (17) on the Leg Lever with a Cable Clip (74). 65 66 1 0 63 , 0 67 . . - 0 , 17 74 0 N® ATTACHING THE LAT BAR, ROWER BAR OR NYLON STRAP TO THE LOW CABLE Attach the Chain (38) between the Lat Bar (41) and the low cable with two Cable Clips (74). The distance between the Lat Bar and the low cable can be adjusted by attaching the Cable Clips closer together or farther apart on the Chain. The Rower Bar (40) or the Nylon Strap (39) can be attached in the same manner. IMPORTANT: if the low cable is used without the Chain, the resistance mechanism may lock up (see TROUBLE-SHOOTING AND MAINTENANCE on page 15 of this owner's manual.) 74 38 39 , 74 41 40 I i 6,0D ATTACHING THE LAT BAR, ROWER BAR OR NYLON STRAP TO THE HIGH CABLE Attach the Chain (38) between the Lat Bar (41) and the high cable with two Cable Clips (74). The . 74 ----§ 3938 distance between the Lat Bar and the high cable can be adjusted by attaching the Cable Clips closer together or farther apart on the Chain. The 74 Rower Bar (40) or the Nylon Strap (39) can be attached in the same manner. IMPORTANT: if the high cable is used without the Chain, the 41 resistance mechanism may lock up (see TROUBLE-SHOOTING AND MAINTENANCE 40 on page 15 of this owner's manual.) 13