Weslo C8 Uk Manual - Page 14
How To Use The Manual Mode
View all Weslo C8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
HOW TO USE THE MANUAL MODE 1 Insert the key into the console. See HOW TO TURN ON THE POWER on page 13. 2 Select the manual mode. When you insert the key, the manual mode will be selected. If you have selected a preset program, reselect the manual mode by pressing the Program Select button repeatedly until a track appears in the matrix. Matrix 3 Start the walking belt. To start the walking belt, press the Start button, the Speed increase button, or one of the buttons numbered 2 through 16. If the Start button or the Speed increase button is pressed, the walking belt will begin to move at 2 Km/H. As you exercise, change the speed of the walking belt as desired by pressing the Speed increase and decrease buttons. Each time a button is pressed, the speed setting will change by 0.1 Km/H; if a button is held down, the speed setting will change in increments of 0.5 Km/H. If one of the numbered buttons is pressed, the walking belt will gradually increase in speed until it reaches the selected speed setting. Note: The console can display speed and distance in either miles or kilometers (see THE INFORMATION MODE on page 17). For simplicity, all instructions in this section refer to kilometers. Note: The first time you use the treadmill, periodically inspect the alignment of the walking belt, and center it if necessary (see page 21). 4 Change the incline of the treadmill as desired. To change the incline of the treadmill, press the Incline increase and decrease buttons. Each time a button is pressed, the incline setting will change by 0.5%; if a button is held down, the incline setting will change quickly. 5 Follow your progress with the displays. When the manual mode is selected, a track representing 400 meters (1/4 mile) will appear in the matrix. As you walk or run on the treadmill, the indicators around the track will appear in succession until the entire track appears. The track will then disappear and the indicators will again begin to appear in succession. The lower left display can show the elapsed time and the distance that you have walked or run during your workout. The display will also show the incline setting for a few seconds each time the incline changes. Note: When a program is selected, the display will show the time remaining in the program instead of the elapsed time. The lower right display can show the speed of the walking belt and the approximate number of calories that you have burned during your workout. This display will also show your heart rate when you use the handgrip pulse sensor. To stop the walking belt, press the Stop button. To restart the walking belt, press the Start button, the Speed increase button, or one of the numbered buttons. 14