Weslo C8 Uk Manual - Page 7
Orient the Right Upright 39 and the Base 37
View all Weslo C8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
1. Make sure that the power cord is unplugged. Attach a Wheel (95) to each side of the Base (37) with a Wheel Bolt (5), two Wheel Spacers (94), and a Nut (12) as shown. Do not overtighten the Wheel Bolts; the Wheels should turn freely. Identify the Right Upright (39), which has a square hole in the location shown. Orient the Right Upright (39) and the Base (37) as shown. Attach the Right Upright to the Base with two Upright Bolts (4) and two Upright Star Washers (6); do not tighten the Upright Bolts yet. 1 39 95 94 94 12 5 95 94 94 5 12 37 Square Hole 6 4 2. Orient the Left Upright (38) as shown, and attach 2 it to the Base (37) with two Upright Bolts (4) and two Upright Star Washers (6); do not tighten the Upright Bolts yet. Latch Holes 37 38 3. With the help of a second person, raise the Uprights (38, 39) so the Base (37) is flat on the floor as shown. Next, position the front of the treadmill Frame (36) between the Uprights. See the inset drawing. Locate the wire inside the lower end of the Right Upright (39). Tie the wire securely to the end of the Upright Wire (69). Next, insert the wire and the end of the Upright Wire into the hole in the Right Upright. 3 38 Wire 6 64 39 39 69 69 Wire 36 37 7