Weslo C8 Uk Manual - Page 15
Metal Contacts
View all Weslo C8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
The upper display can show the elapsed time (or the time remaining in a program), the distance that you have walked or run, the approximate number of calories you have burned, and the speed of the walking belt. Press the Display button repeatedly until the upper display shows the information that you are most interested in viewing. Note: While information is shown in the upper display, the same information will not be shown in the lower left or lower right display. To reset the displays, press the Stop button, remove the key, and then reinsert the key. 6 Measure your heart rate if desired. Before using the handgrip pulse sensor, remove the sheets of clear plastic from the metal contacts. In addition, make sure that your hands are clean. Metal Contacts To measure your heart rate, stand on the foot rails and place your hands on the metal contacts-avoid moving your hands. When your pulse is detected, the heart symbol in the lower right display will begin to flash each time your heart beats, one or two dashes will appear, and then your heart rate will be shown. For the most accurate heart rate reading, continue to hold the contacts for about 15 seconds. 7 When you are finished exercising, remove the key from the console. Step onto the foot rails, press the Stop button, and adjust the incline of the treadmill to the lowest setting. The incline must be at the lowest setting when you fold the treadmill to the storage position, or you will damage the treadmill. Next, remove the key from the console and put it in a secure place. When you are finished using the treadmill, switch the on/off switch to the "off" position and unplug the power cord. 15