Weslo Cadence 975 English Manual - Page 10

Weslo Cadence 975 Manual

Page 10 highlights

setting of the twentieth segment is displayed in the CURRENT SEGMENT column, and no time remains. A tone will then sound, indicating that the program is completed. Note: The program can be stopped at any time by pressing the STOP button. The incline of the treadmill can be changed during the program with the INCLINE buttons. When the program is completed, a different program can be selected or the console can be switched to the manual mode by pressing the MANUAL button. OPERATING THE MONITOR MODES TIME Mode: When the console is in the manual mode, the TIME display will show the total time that the walking belt has been moving, up to 99 minutes and 59 seconds. (If the treadmill is run for longer than 99 minutes and 59 seconds, the walking belt will automatically stop. This safety feature prevents the treadmill from being left running for long periods of time.) If desired, a time goal can be set. To set a time goal, first stop the walking belt. Press the TIME SET buttons to set the length of time that you plan to exercise. Each time one of the buttons is pressed, the length of time displayed will change by ten seconds. The buttons can be held down to set a time goal quickly. A time goal can be set for a minimum of 10 seconds up to a maximum of 99 minutes and 50 seconds. As you exercise, the time will be counted down. When the time goal is completed, a tone will sound and the walking belt will slow to a stop. Note: When a program is selected, the TIME display will show the time remaining in the program. PULSE Mode: To use the pulse mode, press the PULSE button. The indicator on the PULSE button will light. Plug the pulse earclip into the jack on the front of the console, attach the earclip to your left ear lobe and slide the metal clothes clip onto your collar. When your pulse is detected, the heart-shaped PULSE indicator will flash with each heartbeat. After a few seconds, your pulse will be shown in the PULSE display. Ifyourpulse is not shown, rub your ear lobe and reposition the earclip. It may be helpful to stand still while measuring your pulse. CALORIES Mode: To use the calories mode, press the CALORIES button. The indicator on the CALORIES button will light. The display will show the approximate number of nutritional Calories that you have burned. DISTANCE Mode: The DISTANCE display will show the total distance that you have walked or run, in miles. TURNING OFF THE POWER To turn off the power, remove the safety key from the console. Store the safety key in a secure location. INFORMATION MODE The console features an information mode that keeps track of trip time and distance, as well as the total time and distance that the treadmill has been operated. To select the information mode, hold down the STOP button while inserting the safety key into the console. When the information mode is selected, the TIME display will show the trip time, up to 9,999 hours. The DISTANCE and PULSE displays together will show the trip distance, up to 99,999 miles. While the trip time and distance are displayed, they can be reset to zero by pressing the TIME SET decrease button. To view the total time and distance, press the TIME SET increase button. The TIME display will show the total time, up to 9,999 hours. The DISTANCE and PULSE displays together will show the total distance, up to 99,999 miles. To exit the information mode, remove the safety key. 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

setting
of
the
twentieth
segment
is
displayed
in
the
CURRENT
SEGMENT
column,
and
no
time
remains.
A
tone
will
then
sound,
indicating
that
the
program
is
completed.
Note:
The
program
can
be
stopped
at
any
time
by
press-
ing
the
STOP
button.
The
incline
of
the
treadmill
can
be
changed
during
the
program
with
the
INCLINE
buttons.
When
the
program
is
completed,
a
different
program
can
be
selected
or
the
console
can
be
switched
to
the
man-
ual
mode
by
pressing
the
MANUAL
button.
OPERATING
THE
MONITOR
MODES
TIME
Mode:
When
the
console
is
in
the
manual
mode,
the
TIME
display
will
show
the
total
time
that
the
walking
belt
has
been
moving,
up
to
99
minutes
and
59
seconds.
(If
the
treadmill
is
run
for
longer
than
99
minutes
and
59
seconds,
the
walking
belt
will
automatically
stop.
This
safety
feature
prevents
the
treadmill
from
being
left
running
for
long
periods
of
time.)
If
desired,
a
time
goal
can
be
set.
To
set
a
time
goal,
first
stop
the
walking
belt.
Press
the
TIME
SET
buttons
to
set
the
length
of
time
that
you
plan
to
exercise.
Each
time
one
of
the
buttons
is
pressed,
the
length
of
time
dis-
played
will
change
by
ten
seconds.
The
buttons
can
be
held
down
to
set
a
time
goal
quickly.
A
time
goal
can
be
set
for
a
minimum
of 10
seconds
up
to
a
maximum
of
99
minutes
and
50
seconds.
As
you
exercise,
the
time
will
be
counted
down.
When
the
time
goal
is
completed,
a
tone
will
sound
and
the
walking
belt
will
slow
to
a
stop.
Note:
When
a
program
is
selected,
the
TIME
display
will
show
the
time
remaining
in
the
program.
PULSE
Mode:
To
use
the
pulse
mode,
press
the
PULSE
button.
The
indicator
on
the
PULSE
button
will
light.
Plug
the
pulse
earclip
into
the
jack
on
the
front
of
the
console,
attach
the
earclip
to
your
left
ear
lobe
and
slide
the
metal
clothes
clip
onto
your
collar.
When
your
pulse
is
detected,
the
heart
-shaped
PULSE
indicator
will
flash
with
each
heartbeat.
After
a
few
seconds,
your
pulse
will
be
shown
in
the
PULSE
display.
If
your
pulse
is
not
shown,
rub
your
ear
lobe
and
reposition
the
earclip.
It
may
be
helpful
to
stand
still
while
measuring
your
pulse.
CALORIES
Mode:
To
use
the
calories
mode,
press
the
CALORIES
button.
The
indicator
on
the
CALORIES
but-
ton
will
light.
The
display
will
show
the
approximate number
of
nutritional
Calories
that
you
have
burned.
DISTANCE
Mode:
The
DISTANCE
display
will
show
the
total
distance
that
you
have
walked
or
run,
in
miles.
TURNING
OFF
THE
POWER
To
turn
off
the
power,
remove
the
safety
key
from
the
console.
Store
the
safety
key
in
a
secure
location.
INFORMATION
MODE
The
console
features
an
information
mode
that
keeps
track
of
trip
time
and
distance,
as
well
as
the
total
time
and
distance
that
the
treadmill
has
been
operated.
To
select
the
information
mode,
hold
down
the
STOP
button
while
inserting
the
safety
key
into
the
console.
When
the
information
mode
is
selected,
the
TIME
display
will
show
the
trip
time,
up
to
9,999
hours.
The
DISTANCE
and
PULSE
displays
together
will
show
the
trip
distance,
up
to
99,999
miles.
While
the
trip
time
and
distance
are
displayed,
they
can
be
reset
to
zero
by
pressing
the
TIME
SET
decrease
button.
To
view
the
total
time
and
distance,
press
the
TIME
SET
increase
button.
The
TIME
display
will
show
the
total
time,
up
to
9,999
hours.
The
DISTANCE
and
PULSE
displays
together
will
show
the
total
distance,
up
to
99,999
miles.
To
exit
the
information
mode,
remove
the
safety
key.
10