Weslo Momentum 950 Elliptical User Manual - Page 8

12. Identify the Left Pedal (13), which has an "L" molded into its bottom surface, and the Left Pedal Arm (14), which is marked with a sticker. Attach the Left Pedal (13) to the Left Pedal Arm (14) with two M8 x 48mm Button Screws (20) and two M8 Split Washers (74). Attach the Right Pedal (not shown) in the same way. 13. Apply a thin film of grease to the shaft of a Bolt Set (27) and the post on the left Crank Arm (36). Slide the Left Pedal Arm (14) onto the post on the left Crank Arm (36). Attach the Left Pedal Arm with a Wave Washer (94), an M8 Large Washer (17), and an M8 x 19mm Button Screw (22). Attach the Left Upper Body Leg (73) to the Left Pedal Arm (14) with the Bolt Set (27). See step 6 on page 6. Tighten the M8 x 42mm Button Bolts (50). Make sure that the M8 Nylon Locknuts (46) are seated in the hexagonal holes. Attach the Right Pedal Arm (16) to the right side of the elliptical exerciser in the same way. 12 13 74 20 13 73 Grease 27 14 74 16 36 14 17 22 94 Grease 14. Make sure that all parts of the elliptical exerciser are properly tightened. Place a mat under the elliptical exerciser to protect the floor or carpet from damage. 8